Self Leveling 100% Solids Industrial Grade Epoxy One Stop Epoxy Self Leveling 100% Solids Industrial Grade Epoxy is a professional grade, high build floor coating engineered for extreme durability in residential, commercial, and industrial environments. This self leveling resin creates a seamless, high gloss surface with superior adhesion and the chemical resistance required for long term performance. Sold as a 3 gallon short fill kit, this system arrives clear or pre pigmented in white, light gray, medium gray, black, or tan to save you time and eliminate mixing errors on the jobsite. What Is a 100% Solids Industrial Epoxy? Unlike water based or solvent based store coatings, a 100% solids epoxy contains no fillers that evaporate during the curing process. This means the thickness you apply wet is exactly the thickness that remains when dry. This "high build" characteristic is what allows the material to self level, filling minor imperfections in the concrete to create a heavy duty finish. Why Professionals Choose Pre Pigmented Short Fill Kits Eliminate Mixing Errors: No separate pigment packs to measure; the color is already balanced in the resin. In-Bucket Mixing: The "short fill" design allows you to add Part B directly into the Part A bucket, saving you the cost of extra mixing pails. Consistency: Ensures perfect color uniformity across large multi kit pours. Versatility: Use as a standalone solid color floor, a receiver coat for flakes, or a structural base for metallic designs. Mixing and Application Requirements Mix Ratio: 2 Parts A to 1 Part B. Mix Time: 3 Full Minutes at 300 to 450 RPM. Working Time: 45 Minutes on the floor (8 minutes if left in the bucket). Traffic Ready: 24 Hours for foot traffic; 7 days for full chemical cure. Frequently Asked Questions Is this a true 100 percent solids epoxy?Yes. This is a true 100 percent solids industrial resin containing no water or solvents. The thickness you apply wet is the thickness that remains after cure. Is this a good epoxy for garage floors?Yes. It is the gold standard for garage floor coatings because it provides the high build and chemical resistance needed to withstand hot tires and automotive fluids. Does this come pre pigmented?Yes. Our short fill kits arrive pre pigmented in White, Black, Light Gray, Med Gray, and Tan, ensuring color consistency and ease of use. Do I need a separate mixing bucket?No. The short fill design allows you to pour Part B directly into the Part A bucket for convenient mixing. How long should I mix the epoxy?Mix for a minimum of 3 minutes using a low speed drill and a cage style mixer to ensure a complete chemical crosslink. What is the working time once mixed?Once poured onto the floor, you have approximately 45 minutes at 75 degrees. If left in the bucket, the material can harden in less than 10 minutes (exotherm). Can this be used for a full flake floor?Yes. It is an excellent pigmented receiver coat for vinyl flakes. For a pro finish, topcoat with PolyGloss 85 Polyaspartic after scraping the flakes. Does surface prep matter with self leveling epoxy?Absolutely. Proper mechanical grinding to a CSP 2 or 3 profile is required for a permanent bond. Self leveling refers to the finish, not prep. Can I use this as a base for metallic floors?Yes. It provides a stable, uniform pigmented foundation for Metallic Dream Epoxy body coats. How many square feet does a kit cover?A 3 gallon kit typically covers 400 to 450 square feet as a receiver coat for flakes or 300 to 400 square feet for a high build solid color finish.

150 Fast Cure 100% Solids Epoxy | Primer, Base Coat & MVB One Stop Epoxy 150 Fast Cure (150FC) is a contractor grade, rapid-curing 100% solids epoxy engineered specifically for high-efficiency broadcast systems. This versatile resin functions as a primer, base coat, and Moisture Vapor Barrier (MVB) in a single application, allowing crews to complete full flake, quartz, and sand broadcast floors in a fraction of the time. Designed for one day floor installations, 150FC performs exceptionally well in hot and humid environments, offering a rapid return to service without the "flash cure" risks of inferior fast-setting epoxies. The 150FC Technical Advantage 3-in-1 System: Acts as a high-strength primer, pigmented base coat, and MVB rated up to 12 lbs. 90-Minute Recoat: Fast cure profile allows for scraping and top coating in as little as 90 minutes in warmer temperatures. Extended Working Time: Provides 20 to 30 minutes of open time on the floor nearly double that of traditional rapid cure epoxies. UV Considerations: Engineered for full broadcast systems (flake, quartz, sand) where the epoxy is fully covered to prevent visible ambering. Best Uses for Fast Cure Epoxy One Day Flake Floors: The industry standard for rapid garage and commercial prep. Sand & Quartz Broadcasts: Ideal for industrial non-slip systems requiring fast turnaround. Humid Climates: Specifically formulated to remain manageable in high-humidity markets like Florida. Mixing and Application (Critical for Success) Pro Warning: 150FC is for experienced installers. It requires mechanical surface prep (CSP 2-3) and must be poured in ribbons immediately after mixing to avoid exotherm in the bucket. Mix Ratio: 2 Parts A to 1 Part B. Mix Time: 2 minutes if above 75°F; 3 minutes if below 75°F. Mixer: Use a box or cage style mixer for full kits. Working Time: 20–30 minutes depending on ambient temperature. Frequently Asked Questions Is this a good epoxy for garage floors?Yes. It is the preferred base coat for professional installers performing one day full flake garage floor installations. What makes 150FC different from other fast cure epoxies?150FC includes a built-in moisture vapor barrier (up to 12 lbs) and offers significantly more working time on the floor than standard rapid-set resins. Can I use this for a one day flake floor?Yes. This is the primary use for 150FC. Its fast cure profile allows you to prep, base, flake, and topcoat in a single shift. Why can’t this be used for solid color floors?Because 150FC is a fast-cure aromatic epoxy, it will amber under UV exposure. It must be used in a broadcast system where it is completely covered by flakes, sand, or quartz. Is this product beginner friendly?No. 150FC is designed for experienced contractors who understand how to manage fast-curing materials and jobsite pacing. Does this replace a moisture vapor barrier?Yes. It is rated to block moisture vapor transmission up to 12 lbs, eliminating the need for a separate MVB primer step. How long does 150FC take to dry before I can topcoat?Depending on temperature and humidity, you can typically sweep, vacuum, and topcoat in as little as 90 minutes. What is the working time for this fast cure epoxy?Depending on temperature, you will have between 20 and 30 minutes of working time once the material is poured onto the floor. Can 150FC be used outdoors?Yes, provided it is part of a full broadcast system where the epoxy is entirely covered and protected from UV exposure. Do I need to add solvent to thin this product?No. This is a true 100% solids epoxy. Adding solvents will compromise the cure and the moisture vapor barrier rating.

Moisture Vapor Barrier Epoxy | 25 lb Rated 100% Solids MVB One Stop Epoxy 100% Solids Moisture Vapor Barrier Epoxy is a professional-grade foundation coating engineered to block moisture vapor transmission through concrete slabs. Rated for extreme conditions up to 25 lbs of moisture vapor emission, this product creates a permanent barrier that prevents the most common causes of floor failure: peeling, bubbling, and delamination. This is not a finish coat or a receiver coat. It is a critical insurance policy used to stabilize concrete before installing a 100% solids epoxy build system. Why Professionals Use a 25 lb Rated MVB Concrete is naturally porous and acts like a sponge, releasing moisture vapor for years. When this vapor pressure builds up beneath a standard coating, it physically breaks the bond, leading to total system failure. Our MVB Epoxy solves this by penetrating deep into the concrete capillaries to create a structural seal that can handle high hydrostatic pressure. Extreme Moisture Resistance: Rated to block up to 25 lbs of vapor transmission—far exceeding standard epoxies. Prevents Osmotic Blistering: Stops the bubbles that form when moisture is trapped under the floor. Superior Bond Strength: Provides a stabilized, non-porous surface for your next epoxy layer to lock onto. Zero VOC Formulation: 100% solids with no odor, making it safe for interior and basement applications. The Proper System Sequence To ensure a lifetime bond on slabs with moisture concerns, follow the professional "Step-Up" method: The Barrier: Apply One Stop MVB Epoxy directly to mechanically profiled concrete (CSP 2-3). The Build Coat: Once cured, apply a layer of 100% Solids Self Leveling Epoxy. This acts as your pigmented base or "receiver coat" for flakes. The Finish: Complete the system with a high-performance Polyaspartic or Urethane topcoat. Mixing and Application Requirements Pro Tip: Do not broadcast flakes or quartz directly into the MVB. This material must be applied as a continuous, unbroken film to effectively block moisture. Mix for a full 3 minutes to ensure the chemical barrier is fully cross-linked. Mix Ratio: 2 Parts A to 1 Part B. Mixer: Use a box or cage style mixer at 300 to 450 RPM. Coverage: 100 to 150 square feet per gallon depending on porosity. Dry Time: 8 to 10 hours at room temperature. Frequently Asked Questions Do I need a moisture vapor barrier epoxy?If moisture is present, unknown, or if you are installing over a slab on grade, this is a necessary preventative step to avoid total coating failure. How do I know if my concrete has a moisture problem?Visible signs include efflorescence (white powder) or dark spots. The only certain way is testing, but applying MVB is the safest preventative measure for any slab where the history is unknown. Can I use this for basement floors?Yes. Basements are inherently prone to moisture issues. Using this vapor barrier is the best way to ensure your basement epoxy floor never peels or bubbles. Can I broadcast flakes directly into the MVB?No. The Moisture Vapor Barrier must be applied as a clean, continuous film to seal the slab. After it cures, you apply a 100% solids epoxy layer to serve as your pigmented receiver coat for flakes. Is this required for garage floors?It is highly recommended in humid environments, on older slabs, or if you are a professional installer offering a long-term warranty to your clients. What happens if I skip this step?Skipping moisture control on a high-vapor slab leads to osmotic blistering and total system delamination, requiring a costly total replacement. Can this be used as a finished floor?No. This is a functional base layer designed to stabilize the slab. It must be covered by a 100% solids epoxy build coat and an appropriate topcoat. What should I use over this product?Typically, installers follow this with a 100% solids epoxy (like our Self Leveling or 150 Fast Cure) before moving to their decorative broadcast or topcoat. How long do I have to wait before applying my next coat?The material is generally dry to the touch in 8 to 10 hours. You should apply your next coat of epoxy within 24 hours to ensure a strong chemical bond. What is the mix ratio?The mix ratio is 2 parts Part A to 1 part Part B. Mix thoroughly with a drill mixer for a full 3 minutes before pouring.

Metallic Dream Epoxy | Premium Designer Metallic Resin Metallic Dream Epoxy is a professional grade, 100% solids epoxy system engineered specifically for high-end metallic floor applications. Unlike standard resins, this is a design driven system that provides the extended open time necessary to create one of a kind floors with incredible depth, flowing movement, and a mirror-like high gloss finish. Used in residential living spaces, showrooms, and retail environments, Metallic Dream delivers the perfect balance of workability, artistic control, and visual impact. The Metallic Dream Advantage: 60 Minutes of Control Metallic epoxy is an art form, and art takes time. Most failures occur when the resin "locks up" too quickly, leaving harsh roller marks and stagnant patterns. Metallic Dream Epoxy is formulated to stay fluid for up to 60 minutes, allowing installers to: Manipulate Movement: Soften and blend colors using a Magic Trowel without the resin tacking up. Minimize Bubbles: Extended leveling time allows air to escape more efficiently. Achieve 3D Depth: High-build, 100% solids chemistry creates the "thick" look that makes metallic pigments pop. The Professional System Build The Foundation: Concrete must be mechanically ground. For porous slabs, use our Water Based Epoxy Primer to prevent outgassing. The Base Coat: Apply a solid pigmented base using our 100% Solids Self Leveling Epoxy. Black is the industry standard for maximum contrast. The Money Coat: Apply Metallic Dream mixed with your chosen pigments. Manipulate the surface with an 18-inch Magic Trowel for an organic, marble-like flow. The Shield: Finish with Premera T2 Topcoat for elite scratch resistance that preserves the high gloss shine. Mixing and Application Guidelines Pro Tip: Never "whip" the product. Mixing at high speeds traps micro-bubbles in the resin that can ruin a glass-finish floor. Use a low-speed paddle mixer and ensure pigments are fully dispersed before pouring. Coverage: Approximately 150 sq. ft. per kit (50 sq. ft. per gallon for proper flow). Mix Speed: Keep drill under 300 RPM. Working Time: Up to 60 minutes on the floor. Frequently Asked Questions Is metallic epoxy durable?Yes. When protected with a high-performance topcoat like Premera T2, metallic floors are highly durable and suitable for both residential and high-traffic commercial interiors. Do I need to use a black base coat?Black is the preferred base because it acts as a "canvas" that makes metallic colors appear more vibrant and 3-dimensional. However, other colors can be used for custom aesthetic effects. Is every metallic floor different?Yes. Because the epoxy shifts and levels as it cures, no two floors can ever be identical. Each installation is a unique piece of custom art. Can I use multiple metallic colors?Absolutely. Professionals often use a primary color and 1-2 accent colors to create dynamic, marble-like movement and visual interest. Is this system beginner friendly?No. Metallic epoxy requires a deep understanding of timing and flow. We recommend practicing on sample boards before attempting a full-scale floor. How much working time do I have?Metallic Dream provides up to 60 minutes of open time, giving you the longest window in the industry to manipulate your design. What topcoat should I use?We highly recommend Nukote Premera T2 Topcoat Gloss. High-gloss floors show scratches easily; Premera T2 provides a glass-hard shield that protects the aesthetic.

One Stop WB Epoxy Primer | High Performance 2 Part Water Based Epoxy One Stop WB Epoxy Primer is a professional grade water based epoxy designed to create a high bond foundation for epoxy flooring systems. This product is most commonly used as a pore sealing primer under 100% solids epoxy, where controlling outgassing and ensuring adhesion is critical to the success of the entire floor. Universal Compatibility – Approved for use with One Stop 100% Solids, 150FC, Metallic Dream, WB Urethanes, and PolyGloss 85. Multi Purpose Utility – Functions as a high bond primer, a flake floor base coat, or a durable interior finish coat. Pore Sealing Technology – Eliminates outgassing bubbles so your next layer of 100% solids Epoxy goes out bubble free. Industrial Strength – Scratch and abrasion resistant; tough enough for vehicle traffic and commercial use. VOC Compliant – Safe for interior use in garages, kitchens, warehouses, and basements. Most coating failures start at the surface. A properly applied primer like this one eliminates that risk by sealing the concrete and creating a consistent foundation for the system. Where This Product Fits in Your System This primer is designed to work as the first step in a complete epoxy flooring system. Use under 100% solids epoxy base coats Use before Flake or Quartz Systems to improve adhesion Can be used as a standalone coating in light duty applications This is not just a primer. It is the foundation that determines how well your entire system performs. Mixing and Application Instructions Step 1 Pre Mix Because this is a water based product, settlement is normal and expected. Blend the bucket of BASE (Part A) for 1 minute before pouring into a larger bucket and combining with activator. Step 2 The Blend For 1 Gallon Kits: Pour Part A and Part B into a larger mixing bucket and blend for 2 minutes using a paddle mixer. For 2 or More Gallons: When mixing multiple kits together (up to 4 gallons in a 5 gallon bucket), you must use a Box Mixer and blend for 2 - 3 minutes to ensure a complete chemical reaction. Step 3 Application Pour the mixed material directly onto the floor. While wearing spiked shoes, spread the material evenly using a flat squeegee. Small Projects: You may utilize a paint tray and dip and roll using a 1/4” nap epoxy roller (ensure the roller is de-shedded prior to use). To avoid roller lines, you may backroll the floor before the product becomes tacky. Coverage and Technical Specs All SFPG dependent upon porosity of the concrete: Primer on Porous Concrete: 200 to 250 SFPG Grind and Seal Base Coat: 200 to 250 SFPG Grind and Seal Body Coat: 150 to 200 SFPG Light Duty DIY Garage Floor (Needs Pigment and Two Layers): 150 to 175 SFPG Concrete Sealer / Dust Proofing: 200 to 250 SFPG Densifier Application: When applying to very soft or weak concrete, add 10% water to the first coat and apply as a densifier. The material should be applied to saturate the surface and allow for proper penetration into the concrete. Coverage rates for this application will vary depending on the condition and porosity of the concrete. Once the densified layer has dried, apply a second full strength coat without dilution. This exception applies only when using the product as a densifier and does not apply to standard primer or coating applications. Application Temp: Best if applied between 55 and 90 degrees Fahrenheit. Cure Schedule and Recoating Tack Free / Foot Traffic: 12 Hours Recoat Window: 24 Hours Heavy Foot Traffic: 48 Hours Vehicular Traffic: 72 Hours (3 Days) When To Sand For Additional Coats: A second coat may be applied within the 24 hour recoat window without sanding. If more than 24 hours have passed since the previous application, sanding is required. Sand the surface using a 100 to 120 mesh sanding screen, then vacuum and wipe the surface with denatured alcohol or acetone to achieve a proper mechanical bond before applying the next coat. Frequently Asked Questions Can I add a little water to make the primer spread further?No. You should not thin to expand coverage rate. Thinning disrupts the chemical bond and will result in a weak coat. The only exception is adding 10% water when using the product strictly as a densifier for very soft, crumbly concrete. Why do I have to sand before applying my metallic or topcoat?Sanding creates a mechanical profile or "teeth" for the next layer to grab onto. Skipping this step leads to poor adhesion and potential delamination. Which mixer should I use?For single gallon kits, a standard paddle mixer is fine. For anything 2 gallons or larger, a Box Mixer is required to ensure the Part A and Part B are fully integrated without trapping excessive air. Do I need a primer before epoxy?Yes. A primer improves adhesion, seals concrete pores to reduce outgassing, and helps prevent bubbles in your high build layers. Can I use this under metallic epoxy?Yes. This is one of the best applications for this product as it ensures the Metallic Dream layer goes down over a sealed surface, preventing bubbles from ruining the finish. Is this a high build coating?No. Water based epoxy is typically used as a primer or light duty coating, not as a high build system. Can this be used as a final coat?Yes, in light duty environments such as storage areas or mechanical rooms. What happens if I skip sanding between coats?Skipping sanding can lead to poor adhesion and potential delamination between layers of the flooring system.

Poly Gloss 85 Polyaspartic | High Gloss Topcoat System Poly Gloss 85 is a professional grade, 85% solids polyaspartic topcoat designed for epoxy flooring systems that require high gloss, durability, and fast return to service. This two component 1:1 system delivers excellent chemical resistance, UV stability, and long term performance in both residential and commercial environments. This product is intended for professional use only. Polyaspartic coatings require proper mixing, timing, and application technique to achieve the desired results. It is built for experienced installers who need consistent results, longer working time, and a finish that holds up under real world use. Important Notice: Poly Gloss 85 Regular is NOT recommended for metallic epoxy floors. Because of its faster cure profile, standard polyaspartic orange peel texture will be evident. For metallic systems that require extended working time and a smoother, glass like finish, you must use Poly Gloss 85 Slow Go. This product is most commonly used as the final seal coat for full flake, quartz, and solid color epoxy flooring systems. It can also be used as a base coat in applications exposed to direct sunlight where UV stability is required. Unlike many polyaspartics, Poly Gloss 85 is formulated with no plasticizers. This eliminates tire staining and helps maintain the clean, high gloss appearance of the floor over time. What Makes Poly Gloss 85 Different No plasticizers which eliminates tire staining Minimal elasticity prevents tire and equipment impressions High gloss finish for maximum visual impact 22 minute working time which is significantly longer than most polyaspartics UV stable and will not amber High build capability up to 10 mils without whitening Fast return to service Working Time and Application Control Poly Gloss 85 offers approximately 22 minutes of working time, which is 50 to 100 percent longer than most polyaspartic coatings. This allows installers to maintain control, work larger areas, and achieve a more consistent finish. For projects that require even more working time, a slower version is available: Poly Gloss 85 Slow Go, which provides 60 to 90 minutes of working time. Poly Gloss 85 Slow Go is an ideal fit for any size metallic floor and larger solid color and light flake floors. Because of its faster cure profile compared to slower polyaspartic systems, Poly Gloss 85 Regular is best suited for flake, quartz, and solid color floors where speed and durability are the priority. Mixing Instructions Poly Gloss 85 Regular is a 1:1 Base to Activator mixture. When mixing 2 gallons or less, use a 5 Gallon Paddle Mixer and mix for 2 minutes When mixing 3 or 4 gallons in a larger bucket, use a Box Mixer and mix for 2 minutes Always mix at 300 to 450 RPM Proper mixing is critical to achieving consistent cure, clarity, and performance. Coverage Rates Full Flake Epoxy Floor Systems 133 to 150 Square Feet Per 1 Gallon Kit 266 to 300 Square Feet Per 2 Gallon Kit 399 to 450 Square Feet Per 3 Gallon Kit Solid Color and Partial Flake Floors 150 to 175 Square Feet Per 1 Gallon Kit 300 to 350 Square Feet Per 2 Gallon Kit 350 to 525 Square Feet Per 3 Gallon Kit Important Use Guidelines Professional use only – requires proper application technique and timing. Not recommended for metallic epoxy floors – standard polyaspartic orange peel texture will be evident. Best suited for full flake, partial flake, quartz, and solid color systems. For metallic floors, use Poly Gloss 85 Slow Go. Application Equipment For full flake systems, apply using a 24 Inch Flat Red Rubber Squeegee at 133 to 150 square feet per gallon. For solid color and partial flake systems, use a Polyaspartic Application Tool Kit at 130 to 150 square feet per gallon. Dry Time and Recoat Window Tack free in 2 to 4 hours Recoat window within 24 hours Full cure in 24 hours Heavy foot traffic in 24 hours Vehicular traffic in 24 hours Frequently Asked Questions What makes this different from other polyaspartics?Poly Gloss 85 offers longer working time, no plasticizers, and higher gloss than most competing products. Will this product yellow over time?No. It is UV stable and will not amber. Can this be used outdoors?Yes. It is suitable for both indoor and outdoor applications. How long do I have to work with it?Approximately 22 minutes depending on temperature and conditions. Why is no plasticizer important?Plasticizers can lead to tire staining and surface issues. Poly Gloss 85 eliminates that problem. Do I need a topcoat over epoxy?Yes. A polyaspartic topcoat provides protection, UV stability, and long term durability. What is the mix ratio for Poly Gloss 85?It is a simple two component system with a 1:1 mix ratio of Base to Activator. Can I use Poly Gloss 85 Regular over metallic epoxy floors?No. Poly Gloss 85 Regular is not recommended for metallic systems. For metallic floors that require extended working time and a smoother finish, use Poly Gloss 85 Slow Go. When can I drive on the floor after application?Because of its fast return to service, vehicular traffic can resume in just 24 hours. How thick can I apply this topcoat?You can achieve a high build up to 10 mils without the product whitening or trapping moisture.

Poly Gloss 85 Slow Go Polyaspartic | Extended Working Time Topcoat Poly Gloss 85 Slow Go is a premium, professional grade 85% solids polyaspartic topcoat engineered to take the stress out of flooring projects. Unlike fast setting topcoats that require rushing, this custom formulation gives you an unprecedented 60 to 90 minute working window, ensuring a flawless, consistent clear finish on intricate or massive surface areas. This extended working time makes Poly Gloss 85 Slow Go significantly more forgiving than standard polyaspartic coatings. Installers have the ability to work at a controlled pace, maintain a wet edge, and achieve a consistent finish without the pressure of a fast cure system. While this formulation is more approachable than traditional polyaspartics, proper surface preparation, mixing, and application technique are still required for best results. Important Notice for Metallic Floors: Poly Gloss 85 Slow Go is the ultimate recommended clear topcoat for protecting metallic epoxy systems. Because this product remains wet and open for up to 8 hours, it self levels beautifully over your metallic design without trapping roller marks or standard polyaspartic orange peel texture, resulting in a flawless, glass like finish. Formulated entirely without plasticizers, this two component system guarantees zero tire staining, maintaining a pristine, high gloss reflection for years. The Advantage of Slow Go Massive 60 to 90 minute working time drastically reduces installation stress Highly forgiving formulation allows for a controlled, meticulous application Remains wet for up to 8 hours allowing superior self leveling The definitive clear topcoat for metallic epoxy floors Zero plasticizer formula permanently prevents tire staining Extreme UV stability prevents ambering and yellowing Exceptional high gloss finish with outstanding depth and clarity Application Control and Open Time The standout feature of Poly Gloss 85 Slow Go is its extraordinary open time. While standard polyaspartics flash quickly, Slow Go affords installers 60 to 90 minutes of active working time and remains wet on the floor for up to 8 hours. This allows you to: Effortlessly maintain a wet edge across massive commercial spaces Completely eliminate the risk of roller lines and lap marks Achieve unparalleled smoothness as a clear coat over metallic and solid color systems Work at a comfortable, methodical pace in warmer environments If your project demands a rapid return to service rather than extended working time, we highly recommend Poly Gloss 85 Regular. Mixing Guidelines Poly Gloss 85 Slow Go operates strictly on a 1:1 Base to Activator mix ratio. When mixing 2 gallons or less, you must use a 5 Gallon Paddle Mixer and mix thoroughly for 2 minutes. When mixing full 3 or 4 gallon batches, you must use a Box Mixer to prevent folding excess air into the resin, mixing for 2 minutes. Always maintain a drill speed of 300 to 450 RPM. Approximate Coverage Rates Full Flake Receiver Coats 133 to 150 Square Feet Per 1 Gallon Kit 266 to 300 Square Feet Per 2 Gallon Kit 399 to 450 Square Feet Per 3 Gallon Kit Metallic, Solid Color, and Partial Flake Systems 150 to 175 Square Feet Per 1 Gallon Kit 300 to 350 Square Feet Per 2 Gallon Kit 350 to 525 Square Feet Per 3 Gallon Kit Recommended Application Tools For broadcast and full flake systems, spread the material using a 24 Inch Flat Red Rubber Squeegee. For sealing high end metallic and smooth solid color systems, utilize the Polyaspartic Application Tool Kit for optimal results. Cure Schedule and Recoat Window Wet Open Time: Up to 8 hours Recoat Window: Within 24 hours Light Foot Traffic: 24 hours Full Cure / Vehicular Traffic: 48 hours Frequently Asked Questions Is this product easier to apply than standard polyaspartics?Absolutely. Because of the massive 60 to 90 minute working time, it is significantly more forgiving and takes the stress out of the application. Installers have the ability to work at a controlled pace without the pressure of a fast cure system, though proper professional techniques are still required. What is the working time of Slow Go?You will have approximately 60 to 90 minutes of active working time, depending on ambient temperature and jobsite conditions. Is this the right clear topcoat for metallic epoxy floors?Absolutely. Slow Go is the premier choice for sealing metallic systems because it remains wet for up to 8 hours, allowing the clear surface to level out perfectly without trapping roller texture. When can I walk and drive on the floor?The floor can accept light foot traffic in 24 hours, and reaches a full cure ready for vehicles in 48 hours. Can I use this instead of Regular Poly Gloss 85?Yes, but you must account for the slower cure cycle. Use Regular when you need a fast 24 hour return to service, and Slow Go when you prioritize an easy application and maximum working time. Does this product yellow over time?No. The formulation is highly UV stable and engineered to resist ambering, even in areas with sunlight exposure. Why does this formula prevent tire stains?It is manufactured entirely without plasticizers. Plasticizer migration is the primary cause of tire stains, a problem this topcoat entirely eliminates. What is the mix ratio?It requires a simple 1:1 mix ratio of Base to Activator.

One Stop Epoxy Urethane WB | Interior Topcoat for Epoxy Floors One Stop Epoxy Urethane WB is a professional grade water based urethane designed for high performance interior flooring. While modern coatings like Slow Go Polyaspartic and Premera T2 offer advanced speed and clarity, this Water Based Urethane remains the premier choice for occupied residential and commercial spaces where low odor and cost efficiency are the top priorities. Engineered for installers who need a forgiving application window without the heavy chemical smell typical of high solids polyaspartics, this urethane provides a durable, reliable finish for metallic, solid color, and flake systems. It is the perfect balance for projects that demand a professional interior result on a budget conscious scale. Choose this topcoat when low odor and application control are paramount for your interior environment. Where This Product Fits in Your System This protective finish is designed to lock in your decorative system and provide reliable wear resistance: Topcoat for Metallic Dream Epoxy Seal coat for solid color epoxy floors Topcoat for partial flake systems Protective finish over 100% solids epoxy Grind and seal applications directly on concrete Pro Note: While this urethane is highly durable for standard use, for industrial environments, heavy manufacturing, or areas subject to constant forklift traffic, we recommend the Labfender Polyurethane System. Mixing and Application Instructions Step 1 Pre Mix This product features a 3 to 1 mix ratio (three parts resin to one part catalyst). This is a water based product, settlement is normal and expected. Blend the bucket of BASE (Part A) for 1 minute before pouring into a larger bucket and combining with activator. Step 2 The Blend For 1 Gallon Kits: Pour Part A and Part B into a larger mixing bucket and blend for 2 minutes using a paddle mixer. For 2 or More Gallons: When mixing multiple kits together (up to 4 gallons in a 5 gallon bucket), you must use a Box Mixer and blend for 2 - 3 minutes to ensure a complete chemical reaction. Step 3 Application Pour the mixed material 1 - 1.5 gallons at a time into an 18 inch paint tray. While wearing spiked shoes and using a 1/4 or 3/8” nap epoxy roller (ensure the roller is de-shedded prior to use), load your roller and cover an area 4 ' x 4' rolling out the material in a "M" pattern left to right, then a "W" pattern right to left, leaving no roller lines behind. For large areas Multiple people should work this pattern loading the floor as one "Finisher" walks side to side back rolling the material over lapping by 2 inches with each pass. Do not wait to back roll as the product can tack over quickly and roller pickup may occur Small Projects: You may utilize a paint tray and dip and roll using a 1/4 or 3/8” nap epoxy roller (ensure the roller is de-shedded prior to use). To avoid roller lines, you may backroll the floor before the product becomes tacky. The "Orange Peel" Mitigation Tip To achieve a professional, smooth finish and eliminate the "orange peel" texture typical of standard urethanes, add 12 ounces of water per kit into the initial mix. This improves the flow and leveling characteristics, resulting in a significantly smoother, more consistent surface reflection. ⚠️ ENVIRONMENTAL WARNING: Do not apply in direct sunlight or on sunbaked surfaces. Additionally, do not apply with air blowing directly on the floor from fans or HVAC systems. Moving air will cause the coating to skin over before it has a chance to properly lay down, leading to permanent surface defects. Coverage Rate Chart Coverage varies based on dilution and application type. Use the following table as a guide: Application Type Strength Approx. Coverage (SFPG) Metallic Floors (Smooth Finish) Diluted (12oz Water) 500 – 600 SFPG Solid Color (Light Duty) Diluted (12oz Water) 500 – 600 SFPG Partial Flake Floors Full Strength 400 – 500 SFPG Commercial Use (Clear) Full Strength 400 – 500 SFPG Pigmented Urethane (Solid) Full Strength Up to 300 SFPG Pigmented Urethane (Smooth) Diluted (10% Water) 375 – 425 SFPG Cure Schedule and Recoating Tack Free: 6 to 8 Hours Recoat Window: 12 to 24 Hours Heavy Foot Traffic: 48 Hours Vehicular Traffic: 72 Hours Sanding Requirements: A second coat may be applied within 24 hours without sanding. After 24 hours, you must sand the surface with 100-120 grit to create a mechanical bond before applying additional coats. Frequently Asked Questions Will I get roller lines if I use this urethane topcoat?Roller lines are almost always a result of improper application technique. To ensure a uniform finish, it is critical to use an 18-inch roller for your main floor area. This provides equal down pressure across the entire surface, preventing the "squeeze lines" commonly caused by 9-inch roller frames. Use a 9-inch roller only for detail work along the edges. Do I need a primer if I am doing a "Grind and Seal" directly on concrete?If you apply urethane directly to raw concrete, expect to apply multiple layers as the porous slab will "drink" the material. To prevent an uneven finish and save on material costs, we highly recommend first applying our One Stop WB Primer. This seals the concrete and provides a consistent foundation for the urethane. How do I stop my urethane from having an orange peel texture?Standard urethanes are thick. By adding 12 ounces of water to your mixed kit, the product thins just enough to level out perfectly, eliminating almost all orange peel characteristics for a much smoother finish. Is this product suitable for a warehouse with forklifts?While this urethane is very scratch resistant, it is designed for foot traffic and light vehicular use. For industrial environments with constant forklift traffic, our Labfender Polyurethane is the recommended system. Why is sanding required after 24 hours?After 24 hours, the surface becomes too smooth for a chemical bond. Sanding creates a mechanical profile that allows the new layer to anchor securely to the previous one. Can this be used for outdoor concrete?No. This is an interior topcoat. For exterior patios or driveways, use a specialized exterior-grade breathable sealer designed to handle moisture movement through the slab. Can I apply this over a previous coating?The surface must be thoroughly cleaned and mechanically sanded to ensure a proper bond. Applying over an old coating without proper mechanical preparation will likely result in delamination. What is the effect of high humidity on application?Humidity above 75% can slow the evaporation of water from the coating, which may cause a cloudy or "milky" finish. It is best to maintain a controlled interior environment during the cure.

LABPOX 30 100% Solids Epoxy | Professional Flooring System LABPOX 30 is a professional grade, 100% solids epoxy engineered for installers who demand reliability and extended working time. Whether used as a base coat, body coat, or the foundation for metallic epoxy systems, LABPOX 30 delivers the consistency required for high performance industrial, commercial, and residential environments. The Professional Advantage: Unlike limited use epoxies that flash quickly, LABPOX 30 provides a balanced 45 to 60 minute working window, ensuring superior flow, pinhole mitigation, and a glass like finish even on large scale installations. Technical Performance Snapshot Property ASTM Standard / Value Mix Ratio 2 Parts A to 1 Part B Compressive Strength 13,000 psi Tensile Strength 8,500 psi Shore D Hardness 82 Elongation 14 percent VOC Content 9 to 10 g per L (Low VOC) Pot Life (72°F) 50 minutes Where LABPOX 30 Fits in a Flooring System 1. As a High Adhesion Base Coat Provides a consistent, durable foundation for solid color, flake, or quartz broadcast systems. LABPOX 30 is self priming and can be applied directly to properly prepared concrete under the right conditions. 2. As a Metallic Body Coat ("The Money Coat") Specifically optimized for metallic epoxy systems. The extended open time allows for intricate pigment movement and pattern development before the resin sets. 3. As an Intermediate Build Coat Increases overall system thickness and impact resistance in heavy traffic industrial or warehouse environments. Approximate Coverage Rates Application Type Square Feet Per Gallon (SFPG) Metallic Body Coat 50 SFPG Metallic Base Coat 80 to 135 SFPG Vinyl Flake Receiver Coat 133 to 150 SFPG Commercial/Industrial Solid Color 80 to 133 SFPG LABPOX 30 vs. Typical 100% Solids Epoxy Why professional installers choose LABPOX 30 over standard alternatives: Pinhole Mitigation: Advanced technology reduces surface defects by up to 98 percent in pre tinted versions. Extended Control: 60 minutes of working time vs. the standard 20 to 30 minutes of typical epoxies. Chemical Resistance: Superior resistance to amine blush and common site contamination. Cure Schedule (At 72°F) Working Time: 60 Minutes Tack Free: 9 Hours Recoat Window: 9 to 24 Hours Foot Traffic: 24 Hours Full Chemical Cure: 7 Days System Limitations LABPOX 30 requires a dry substrate. Moisture content must be below acceptable limits unless a moisture mitigation system is used. Not intended for exterior applications. Recommended System Setup For a guaranteed bond and long term finish, follow this professional stack: Primer: LAB Surface Epoxy Primer or LABPOX MVB Clear Fast for moisture vapor barriers. Base/Body: Apply LABPOX 30 (Solid Color or Metallic). Topcoat: Seal with LABFAST Xtra Time (Polyaspartic) or LABFENDER Polyurethane for maximum abrasion resistance. Mixing and Application Requirements Application Equipment 1/8 inch notched rubber squeegee 3/8 inch nap woven shed resistant roller cover 3 inch chip brush Mixing Instructions Precision in the mixing process is critical to ensure the chemical bond and structural integrity of the LABPOX 30 system. Combine Components: Pour 2 containers of Part A (Base) into a large mixing bucket, being careful not to pour material onto the sides of the larger bucket. Add Activator: Pour the Part B (Activator) directly into the center of the large bucket. Again, ensure no material gets on the sides of the Base bucket; failing to do so may leave unmixed resin that causes soft spots on your finished floor. Mixing Time: Mix full kits with a Box mixer for 2 minutes. Use a low-speed drill (300 to 450 RPM) to minimize air entrapment. Scrape Sides: During the mixing process, make sure to scrape the sides and bottom of the mixing container thoroughly so no unmixed material remains. Immediate Placement: Once the product is properly mixed, it needs to be immediately poured onto the floor. Leaving mixed material for too long in a mixing pail will create an exothermic reaction (rapid heat buildup), rendering the product unusable. Application Procedure Application Procedure Pour mixed material in a 20 foot long 12 inch wide ribbon Do not drain or scrape remaining material from the bucket onto the floor. Spread to uniform thickness with a notched squeegee and roll North South and back roll East West to achieve uniform coverage. Roller should be a 3/8 inch shed resistant epoxy roller cover. PRO TIP: For metallic floors, use the extended 60 minute window to manipulate your pigments with a 9/16 inch looped roller or notched squeegee to create depth and movement before the product begins its initial set. Frequently Asked Questions Is LABPOX 30 good for metallic epoxy floors?Yes. It is exceptionally well suited for metallic systems due to its 45 to 60 minute working time and excellent flow characteristics, allowing installers to create flawless designs with proper pigment movement. Can this be used as a base coat?Yes. LABPOX 30 works incredibly well as a dependable, high strength base coat for a wide variety of systems, including solid color, flake, and quartz. Is this product beginner friendly?Because of the extended working time, it is more forgiving than fast cure epoxies, but proper surface preparation and installation technique are still required. How long is the actual working time?You will have approximately 60 minutes of working time at 70°F and 45 minutes at 80°F. Humidity and surface temperature can also affect these windows. What is the mix ratio for LABPOX 30?It is a two component system with a precise mix ratio of 2 Parts A to 1 Part B (2A:1B) by volume. Can this be used for flake floors?Absolutely. It performs as a reliable receiver coat for broadcast flake systems, providing enough open time to ensure a consistent flake distribution. Why is the "Extended Working Time" so important?Standard epoxies can flash quickly in the bucket, leading to stress and mistakes. LABPOX 30 gives you a massive window to maintain a wet edge on large floors and execute intricate metallic designs without the product locking up prematurely. Does this require a topcoat?Yes. Like all 100 percent solids epoxies, a UV stable topcoat (like Polyaspartic or Urethane) is highly recommended to prevent ambering and provide long term scratch resistance.

LABPOX 40 UV | UV Resistant Epoxy for Metallic and Decorative Floors - 3 Gallon Kit   LABPOX 40 UV is a premium, 100% solids, 2 to 1 epoxy system engineered specifically for metallic and high end decorative flooring. Unlike standard epoxies that can "amber" or yellow quickly, this system offers superior UV resistance and crystal clarity, making it one of the most trusted options for light colored systems and metallic applications. This product is the preferred choice for installers who require an extended 60 minute working time. This generous window allows for the proper manipulation of metallic pigments, ensuring deep flow and consistent "lava" effects that cheaper, fast setting epoxies simply cannot achieve. This is a world class decorative epoxy designed for appearance driven floors where flow, clarity, and color stability are the only things that matter. Where LABPOX 40 UV Fits in Your System Metallic Body Coat: The primary layer for high end decorative metallic floors. Light Color Systems: Ideal for white or light gray floors requiring improved UV stability. High Build Clear Coat: Used as a thick, clear layer over decorative art or logos. Pro Note: While LABPOX 40 UV is incredibly durable, it is an epoxy. To achieve the ultimate glass like super high gloss finish and provide your floor with maximum scratch resistance, we recommend pairing this system with Premera T2. Key Features and Benefits Extended 60 Minute Pot Life: Plenty of time to guide pigments and eliminate roller marks. Superior UV Resistance: Significantly higher resistance to yellowing compared to industrial epoxies. Excellent Defoaming: Engineered to release air naturally, even at high build (30-50 mil) applications. High Clarity Finish: Transparent enough to allow metallic pigments to "pop" with three dimensional depth. Blush & Fisheye Resistant: Formulated to resist surface defects caused by humidity or substrate inconsistencies. Mixing Instructions Precision in the mixing process is critical to ensure the chemical bond and structural integrity of the LABPOX 40 UV system. Combine Components: Pour 2 containers of Part A (Base) into a large mixing bucket, being careful not to pour material onto the sides of the larger bucket. Add Activator: Pour the Part B (Activator) directly into the center of the large bucket. Again, ensure no material gets on the sides of the Base bucket; failing to do so may leave unmixed resin that causes soft spots on your finished floor. Mixing Time: Mix full kits with a Box mixer for 2 minutes. Use a low-speed drill (300 to 450 RPM) to minimize air entrapment. Mix partial kits with a Paddle Mixer.  Scrape Sides: During the mixing process, make sure to scrape the sides and bottom of the mixing container thoroughly so no unmixed material remains. Immediate Placement: Pour the material onto the floor immediately after mixing. Leaving 100% solids epoxy in the bucket will cause it to exotherm (heat up) and ruin your working time. Application Guidelines To achieve the signature depth of a metallic floor, LABPOX 40 UV must be applied at a much higher film build than standard coatings. Metallic Movement: Apply at a thickness of 30 to 50 mils. This high build volume allows the metallic pigments to stay suspended so they can move naturally and create depth during the cure. Design Technique: Use an 18 Inch Magic Trowel to guide the pigments into your chosen pattern. Contamination Warning: Ensure the job site is a clean environment. Avoid sweat, water, aerosols, or air movement near the wet floor. ⚠️ Metallic Epoxy Installation Tip: Do not apply in direct sunlight or on hot surfaces. Additionally, ensure all HVAC vents are directed away from the floor and turn off all fans. Moving air will cause the epoxy to skin over before it has a chance to properly lay down, ruining the metallic flow and leaving surface ripples. Coverage and Cure Schedule Application Type Approx. Coverage Metallic Body Coat (High Depth) 50 Sq. Ft. Per Gallon Solid Color / Base Coat 133 – 150 Sq. Ft. Per Gallon Super Opaque White 100 Sq. Ft. Per Gallon Working Time: 60 Minutes Tack Free: 9 Hours Recoat Window: 9 to 24 Hours Full Cure: 7 Days Frequently Asked Questions Is LABPOX 40 UV truly UV stable?It is one of the most UV resistant epoxies on the market, but it is still an epoxy. Over several years of exposure to direct sunlight, it will eventually amber. For permanent UV protection, always topcoat with Premera T2. Why is the 60 minute working time important?Metallic floors require manipulation with a Magic Trowel to look their best. Standard epoxies set up too fast, leaving you with harsh lines or flat spots. The 60 minute window allows the pigments to flow and create that 3D depth. Can I use this for a solid color floor?Yes. It is an excellent choice for light colored solid floors because of its improved color stability and clarity. What causes fisheyes in my metallic floor?Fisheyes are almost always caused by surface contaminants. Avoid using aerosol sprays or air fresheners in the building, and ensure the installer does not drip sweat into the wet material. Do I need to sand before topcoating?If you topcoat within 24 hours, you can go right over it. If you wait longer than 24 hours, you must sand the surface to a dull finish to ensure the topcoat bonds properly. What is the best way to clean the floor before applying LABPOX 40 UV?After mechanical grinding, you must vacuum the floor thoroughly. We recommend a solvent wipe with Acetone to ensure no fine dust remains, as dust can cause surface profile issues in high build coatings. Can I apply this over a moisture vapor barrier?Yes. LABPOX 40 UV works perfectly over a moisture barrier. Labpox MVB FAST – 100% Solids Epoxy Moisture Vapor Barrier to prevent the metallic finish from bubbling or delaminating. What happens if a fan is blowing on the project while it cures?Moving air will blow contaminants on to your wet surface and this can be catastrophic. Wind can also cause the surface to skin over prematurely. This prevents the epoxy from laying down properly and stops the metallic pigments from moving, which will leave you with an uneven, wavy finish. Can I use a torch to remove bubbles?Yes, a light pass with a propane torch or a spike roller can help release surface bubbles. However, because LABPOX 40 UV has excellent air release properties, you will find you need to do this much less than with standard resins. How do I achieve the best three dimensional depth?Apply the material at a minimum of 50 SFPG. The thicker the application, the more room the metallic pigments have to sink and swirl, creating that signature glass like depth and movement.  

LABPOX LV UV | Ultra Low Viscosity Metallic Epoxy LABPOX LV UV is a professional grade, 100% solids, 2 to 1 epoxy system engineered for decorative clear and metallic flooring systems where superior flow and finish quality are the top priority. With an ultra low viscosity of approximately 300 cps and a working time of 90 to 100 minutes, this system gives installers exceptional control over movement, leveling, and clarity. Built on high performance cycloaliphatic polyamine technology, LABPOX LV UV is designed as a topcoat or body coat for metallic epoxy and clear resin flooring systems. It offers one of the longest working times in the category, enhanced UV resistance, excellent defoaming, and a clean, high end final appearance. If your goal is a clear or metallic epoxy floor with superior flow, cleaner movement, and refined finish quality, this is one of the best products in the category. Where LABPOX LV UV Fits in Your System Metallic Body Coat: Ideal for decorative metallic floors requiring extended flow and work time. Clear Body Coat: Excellent for clear resin systems where appearance and depth matter. Topcoat Epoxy: Designed for clear or metallic systems that require superior leveling. Decorative Spaces: Strong fit for office, retail, hospitality, and high visibility residential spaces. Technical Performance Snapshot Property Value Mix Ratio 2 Parts A to 1 Part B Viscosity 300 cps (Ultra Low) Working Time 90 to 100 minutes Tack Free 14 hours Recoat Window 14 to 24 hours Full Cure 7 Days Mixing Instructions Because this is an ultra low viscosity specialty epoxy, proper mixing is critical to maintain consistency and finish quality. Pre Mix Part A: Mechanically mix Part A before combining to fully suspend all components. Mix Ratio: Combine 2 parts Part A with 1 part Part B. Mix Time & Technique: Mix for 3 minutes using a Box Mixer on a low speed drill turning at 300 to 450 RPM. Scrape the sides and bottom of the bucket thoroughly. Immediate Placement: Once mixed, pour the material onto the floor as desired to create your metallic design. Leaving it in the pail too long will cause a heat reaction (exotherm) and ruin the product. Coverage by Film Build Thickness Coverage (Sq. Ft. / GAL) Typical Use 8 mils 200 Sq. Ft. Thin clear coat or light body coat 12 mils 133 Sq. Ft. Standard clear or metallic build 30 mils 54 Sq. Ft. High build metallic applications 50 mils 32 Sq. Ft. Maximum depth decorative effects Frequently Asked Questions What makes LABPOX LV UV different from standard epoxy?Its ultra low viscosity and extremely long working time give installers much greater control over flow, pigment movement, and final appearance. It allows the resin to self level more effectively than thicker industrial epoxies. Is this a good epoxy for metallic floors?Yes. This is one of the best choices for metallic floors that require depth, clarity, and an extended window to manipulate designs. How long is the working time?You typically have 90 to 100 minutes depending on temperature and site conditions. This is nearly double the working time of standard epoxies. Is this product UV stable?It offers enhanced UV resistance compared to standard epoxy systems. While all epoxy will eventually amber if exposed to direct sunlight, this cycloaliphatic formulation provides superior color stability for decorative metallic floors. Why is this better for metallic floors than standard resins?Standard epoxies are too thick and set up too fast, which freezes the metallic pigments in place. LABPOX LV UV has an ultra low viscosity that allows pigments to flow and swirl for the entire 100 minute working window, creating a natural three dimensional look. What is the best tool for applying LABPOX LV UV?For metallic designs, a Magic Trowel is essential for laying out your metallic design. For applications where high build depth is required, use a 24 inch red rubber 3/16 inch notched squeegee and if necessary an 18 inch Mohair or Microfiber Roller Cover to completely cover the floor. Do I need to sand before applying a second coat?If you apply the next coat within 24 hours, no sanding is needed. After 24 hours, you must sand the surface to a dull finish to ensure a mechanical bond. Can I use this for heavy duty industrial floors?This product is best suited for residential and commercial decorative systems. For heavy industrial production floors with high forklift traffic, we recommend our industrial grade solids like LABPOX 30. What happens if the material gets hot in the bucket?This is an exotherm reaction. If the bucket feels hot, do not pour it on the floor. The material is beginning to cure rapidly and pouring it will result in surface defects and a failed installation. Is it safe for indoor use?Yes. LABPOX LV UV is 100 percent solids and low VOC. It has very low odor, making it safe for use in occupied buildings and retail spaces.

LABPOX LV 3D UV | Ultra Low Viscosity Epoxy for Advanced Metallic Floors LABPOX LV 3D UV is a premium, 100% solids, 2 to 1 specialty epoxy system engineered specifically for high end metallic flooring where maximum movement, depth, and creative control are required. With an ultra low viscosity and an industry leading 90 to 100 minute working time, this system allows installers to manipulate metallic epoxy far longer than standard epoxies. Built on high performance cycloaliphatic polyamine technology, this resin is designed to produce a superior aesthetic finish with incredible clarity. It is the preferred choice for barber shops, hair and nail salons, custom home garages and automotive retail facilities where a glass like three dimensional effect is the primary goal. This is a specialty metallic epoxy designed for installers who want full control over their design and refuse to be limited by short working times or thick, restrictive resins. Where This Product Fits in Your System Advanced 3D Metallic Floors: The ultimate body coat for deep, moving metallic effects. Large Scale Decorative Projects: Ideal for big pours where you need extra time to maintain a wet edge. High Clarity Clear Coats: Can be used as a thick, clear decorative layer over artwork or logos. Office and Retail Spaces: Provides a high density surface that prevents dirt penetration for easy maintenance. Key Features and Benefits Ultra Low Viscosity (300 cps): One of the thinnest metallic resins available, allowing pigments to travel further and blend more naturally. 90 to 100 Minute Working Time: Nearly double the working time of standard epoxies for effortless 3D floor creations. Superior UV Resistance: Engineered for the best possible color stability in its category. No Amine Blush: Cures to a clean, high gloss finish without the oily film common in cheaper resins. Excellent Defoaming: Formulated to release air naturally, even when applied at heavy 50 mil thicknesses. High Resistance to Contamination: Specifically designed to resist fisheyes and surface defects. Mixing Instructions Because of the extended pot life, proper mixing is vital to ensure the cycloaliphatic resins activate fully. Pre Mix Part A: Mechanically mix Part A for 1 minute before combining to ensure all resins are homogeneous. Mix Ratio: Combine 2 parts Part A with 1 part Part B in the larger bucket. Mix Time: Mix for a minimum of 3 minutes using a low speed drill (300 to 450 RPM). Technique: Scrape the sides and bottom of the container thoroughly. For best results, use a box or cage mixer. Immediate Placement: Even with a long working time, the material should be poured onto the floor in ribbons immediately after mixing to prevent heat build up in the pail. Pro Note: To achieve the ultimate glass like finish and maximum scratch resistance, we recommend pairing this system with Premera T2 once the epoxy has reached its recoat window. Application Guidelines To achieve the signature depth of a 3D floor, LABPOX LV 3D UV must be applied at a high build to allow the low viscosity resin to flow and carry the pigments. Design Depth: Apply at a maximum 50 square feet per gallon. This provides a thickness of roughly 30 to 32 mils, allowing pigments to sink and swirl for maximum visual impact. Technique: Use a squeegee to spread the material, followed by an 18 Inch Magic Trowel to manipulate the metallic design. Ideal Conditions: Best results are achieved when the floor and air temperature are between 60°F and 85°F. Avoid high humidity (above 85%) during the application. ⚠️ ENVIRONMENTAL WARNING: Do not apply in direct sunlight or on sunbaked surfaces. Ensure all HVAC vents are directed away from the floor and turn off all fans. Moving air will cause the epoxy to skin over prematurely, which ruins the self leveling and stops the metallic movement. Coverage and Cure Schedule Application Type Coverage (Sq. Ft. / GAL) 3D Metallic Body Coat (30 Mils) 40 - 50 Sq. Ft. Standard Metallic Build (12 Mils) 50 Sq. Ft. Thin Base Coat / Primer (8 Mils) 200 Sq. Ft. Working Time: 90 to 100 Minutes Tack Free: 14 Hours Recoat Window: 14 to 24 Hours Light Foot Traffic: 48 Hours Full Cure: 7 Days Frequently Asked Questions What makes the 3D UV version different from standard metallic epoxy?It features ultra low viscosity (300 cps) and a 90 to 100 minute working time. This allows the resin to flow more like water, which gives the metallic pigments total freedom to move and create deep visual effects. Does this product resist yellowing?Yes. LABPOX LV 3D UV is formulated with cycloaliphatic polyamine technology, providing some of the best UV resistance in the epoxy category. Why is low viscosity important for metallic floors?Thick epoxies "trap" pigments in place. A low viscosity resin allows the metallic particles to swirl and sink, creating a three dimensional look rather than a flat, painted appearance. Can I use this for a clear topcoat?Yes. Its high clarity and excellent defoaming make it an ideal choice for a clear build coat over decorative designs or logos. How long do I have to wait before walking on the floor?Because of the extended working time and ultra low viscosity, this system takes longer to reach initial hardness than standard epoxies. You should wait at least 48 hours for light foot traffic. For heavy furniture or vehicle traffic, wait a full 72 hours to ensure the resin has reached its full chemical resistance and hardness. Can I mix multiple metallic colors together?Yes. One of the greatest advantages of the ultra low viscosity in LABPOX LV 3D UV is how beautifully it allows different metallic pigments to blend. You can "ribbon" different colors into each other or mist the surface with a secondary color to create natural veining and marble effects that stay fluid longer. Do I need a specific base coat color for metallic epoxy?Yes. Metallic pigments are translucent. To achieve the best results, you should apply a solid color epoxy base coat (like LABPOX 35) first. Black is the most common choice as it makes the metallic colors pop with maximum depth, but lighter base colors can be used to create softer, more subtle finishes. How do I prevent bubbles or "pinholes" in my metallic finish?Because metallic epoxy is applied at a high build, any air escaping from the concrete (outgassing) will be trapped. You must ensure the slab is perfectly sealed with a primer or moisture barrier like MVB FAST before applying your metallic body coat. This ensures the 3D layer stays smooth and glass like. What is the best way to create "cells" or "craters" in the design?If you are looking for specific effects like cells or hammered metal textures, you can lightly mist the surface with 99 percent Isopropyl Alcohol while the epoxy is still in its 90 minute working window. The alcohol breaks the surface tension and causes the metallic pigments to disperse into unique, circular patterns. Can I apply this over a previous coating?Yes, but only if the existing coating is well bonded and has been mechanically sanded to a completely dull finish. If there is any gloss remaining, the new metallic layer will not bond properly. Always perform a small test area to ensure compatibility between different resin systems. What happens if the material starts to heat up in the bucket?This is known as an exotherm reaction. If the mixed material sits in the pail too long, it will begin to smoke or harden rapidly. If you feel the bucket getting hot, STOP RIGHT THERE! It's ruined. You've left it in the bucket too long and you'll create all kinds of cleanup challenges if you dump that on the floor.