Ameripolish Strip n Clean
from $59.99
Ameripolish Strip n Clean 1 Gal
Ameripolish Strip n Clean is a water-based stripping agent that is designed to remove the Ameripolish 3D SP sealer from polished concrete floors without any need for grinding, It can also help remove mold, mildew, and other contaminants that could otherwise impair your project. This easy-to-use product is an essential tool for anyone looking to prepare their concrete floors for a fresh coat of sealer or a ColorJuice application.
6-10¢PER FT2
400-600FT2PER GALLON
Ameripolish G3 Burnishing Pads...
$99.99
Ameripolish G3 Burnishing Pads 21" 2 Pack
Ameripolish G-series pads, specially designed for high-speed floor machines operating between 1500-3000 RPM. These nonwoven burnishing pads, crafted with durable polyester fibers, are perfect for the dry burnishing phase following the application and drying of Ameripolish stain protection. Explore our range of varying pad sizes to meet your specific needs. Elevate your floor maintenance with Ameripolish G-series pads.
Ameripolish B-O-G Modified Ure...
$349.99
$599.00
Ameripolish® B-O-G Urethane Coating
Product Overview
Ameripolish® B-O-G is a single-component modified urethane coating designed to protect concrete and cementitious overlayment systems from stains caused by corrosive cleaning agents. Ready to use with a user-friendly application style.
Key Features
Ready to use (RTU)
Glossy, non-yellowing finish
Fast-drying formula
Chemical resistant
Mildew and UV protection
Suitable for most cementitious surfaces
Recommended Uses
Concrete and cementitious overlayment systems
Residential and commercial floors
Garages, patios, and lanais
Industrial and high-traffic areas
Installation Notes
Ensure surface is clean, dry, and free of contaminants
Stir thoroughly before use; no on-site mixing required
Apply with a roller or airless sprayer at 300–400 sq ft per gallon
Maintain ambient temperature between 50 °F and 90 °F
Allow 2–4 hours for light foot traffic; 24 hours for full cure
Ameripolish SureLock Dyes
$64.99
Ameripolish SureLock Dyes - Vibrant Chemically Bonded Concrete Colors
Product Overview
Ameripolish® SureLock Dyes are high-performance, chemically bonding colorants for polished concrete. With an updated formula, these dyes provide the most vibrant colors Ameripolish® has ever produced. Designed for indoor use, SureLock Dyes mix easily with water or Ameripolish® ColorSolve™ and are applied just before densifying with 3D HS or HSL, allowing the color to penetrate deeply and chemically bond with the concrete.
The liquid concentrate is fast and convenient no 3-hour wait to dissolve is needed like with other dyes. UV stabilizers resist fading, while a built-in penetrating agent ensures consistent, rich colors even on hard, dense surfaces. VOC-compliant and compatible with optional 3D line densifiers, SureLock Dyes are the ideal choice for achieving long-lasting, vibrant polished concrete finishes.
Frequently Asked Questions (FAQs)
What surfaces are compatible with SureLock Dyes?SureLock Dyes are designed for polished concrete surfaces, including hard, dense concrete, and are ideal for indoor use.
How do SureLock Dyes chemically bond to concrete?When applied just before densifying with 3D HS or HSL, the dyes penetrate the concrete and chemically bond, ensuring long-lasting, vibrant color.
Can I mix SureLock Dyes with water or other solutions?Yes, SureLock Dyes mix easily with water or Ameripolish® ColorSolve™, providing convenience and flexibility for your project.
Do I need to pre-dissolve SureLock Dyes before use?No. The liquid concentrate eliminates the traditional 3-hour pre-dissolving process, saving time and simplifying application.
Are SureLock Dyes UV-stable?Yes, the formula contains UV stabilizers to resist fading, maintaining rich, consistent colors over time indoors.
X-Link E WL Sealer 1 - Gallon
$42.51
Ameripolish X-Link E (WL) Modified Urethane in Wet Look Finish
Ameripolish® X-Link E (WL) is a high-gloss, modified urethane sealer designed to give surfaces a vibrant wet look. It’s a durable and breathable coating that maintains its appearance while protecting surfaces from various environmental factors.
Key Features:
True Wet-Look Finish: Delivers a high-gloss, wet appearance that enhances the surface’s visual appeal.
Non-Yellowing Formula: Maintains clarity and prevents discoloration over time.
Breathable: Allows moisture to escape from beneath the surface, reducing the risk of trapping water.
Fast Drying: Dries quickly, typically within 1 hour, facilitating faster project completion.
Durable Protection: Provides resistance to oil, chemicals, mildew, and UV rays, extending the lifespan of the surface.
Water-Based: Environmentally friendly and easy to clean up with water.
Versatile Application: Suitable for a variety of cementitious and masonry surfaces, including concrete, brick, stone, stucco, slate, and flagstone.
Ready to Use: No need for mixing or diluting; apply directly from the container.
Outdoor-Approved: Designed for durability in exterior environments, with protection against weathering and wear.
Uses:
Concrete Surfaces: Both colored and uncolored, stamped, or exposed aggregate.
Masonry Surfaces: Includes porous brick, natural and manufactured stone, stucco, slate, and flagstone.
Unglazed Tile: Can be applied to unglazed ceramic or porcelain tiles.
Dilution & Coverage:
Ready to Use (RTU): Do not dilute or mix with other chemicals.
Coverage: Approximately 500-1000 sqft per gallon, depending on surface porosity.
Product Specifications:
Application: Spray on.
Appearance: Milky.
VOC: 5g/L (Compliant with various environmental regulations).
Shelf Life: 1 year.
Solvent: Water-based.
Professional Grade
Professional grade systems trusted by contractors and serious DIY installers nationwide.
Nationwide Shipping
Free to the 48 continental states, with low cost shipping to Alaska and many Latin American countries.
Technical Support
Talk to real, experienced installers before, during, and after your project.
5 Star Rated Business
Positive reviews from a growing number of happy customers.
