Self Leveling 100% Solids High Strength Epoxy
One Stop Epoxy's 100% Solids Self Leveling Epoxy is a very versatile 100% solids, two-component, high-build epoxy floor coating that’s designed for applications where heavy-duty protection is required. This is a 3 gallon kit that will easily cover up to 450 square feet. This 100% Solids Epoxy is very easy to use, it’s self-leveling, and delivers a high-gloss chemically resistant surface.
Features and Benefits
- Seamless High Build Coating
- Outstanding Adhesion
- Chemical Resistant
- Abrasion Resistant
- Hard Wearing
- Solvent Free
- Low Maintenance
- Impact Resistant
- Self Leveling
- Meets USDA Requirements For Incidental Food Contact
- Can be combined with Vinyl Flakes, Quartz, or Metallic Additives
Recommended Use
- Restaurants and Bars
- Sports Arenas
- Automotive Showrooms
- Automotive Service Areas
- Health and Beauty Salons
- Residential Garages
- Schools and Universities
- Aircraft Hangers
Product Applications
Partial Flake Epoxy Floors - Combine with Solid Colors pigments and broadcast 1–3 pounds of vinyl flake into epoxy for every 100 sq ft of concrete flooring. The 100% Solids Self Leveling Epoxy will provide a solid base that will provide a strong foundation for your top coat. Seal coat your system with our industrial strength Urethane topcoat.
Full Flake Epoxy Floors - Combine with Solid Colors and broadcast 8 pounds of vinyl flakes for every 50 sq ft of concrete flooring. The 100% Solids Self Leveling Epoxy will provide a solid base that will provide a strong foundation for your top coat. Experienced installers should finish off the system with our High Performance Polyaspartic Gloss. Less experienced installers and DIYers should seal coat the flooring system with 1–2 coats of Urethane Gloss/Satin. This is a very user friendly Water-Based Urethane available in Satin, Matt, or our most popular High Gloss Urethane finish coat.
Marbled and Metallic Floors - Add Metallic Epoxy pigments to create eye catching Marbled and Metallic floors. One Stop Epoxy's 100% Solids Epoxy has a distinctly beautiful body that provides just the right amount of movement. Seal the floor with Urethane Topcoat available in Satin, Matt, or our most popular High Gloss Urethane finish coat.
Non-Slip Floors - Add Solid Colors pigments in your color of choice. Apply Coating Solutions 100% Solids Self Leveling Epoxy as a base coat and broadcast non-slip aggregates at full coverage. Let dry. Apply a second grout coat of of One Stop Epoxy's 100% Solids Epoxy. Let dry. Seal with Urethane Gloss or Satin Topcoat to produce an industrial grade non-slip surface.
Coverage Per Kit: Up to 450ft²
Approximate Coverage:
Pigmented receiver coat for vinyl chips: 133-150 SFPG
Primer on Porous Concrete: 150-200 SFPG
Commercial and Industrial applications: 100-135 SFPG
Metallic Floors base coat: 135-150 SFPG
One Stop Epoxys standard resin is a 2 to 1 ratio 100% solids, two-component, high-build epoxy floor coating that’s designed for applications where heavy-duty protection is required.
Our Epoxy is easy-to-use, self-leveling, and delivers a high-gloss and chemically resistant surface. Combine with Decorative Chips, quartz, or Metallic Additive systems to create an attractive and durable finish or broadcast non-slip aggregates to produce a non-slip surface.
Application Equipment: Flat – 3/16 inch notched rubber squeegee Rollers
3/8” nap, woven, shed-resistant roller cover in 4, 9 , or 18 inch.
2 inch chip brush
Mixing: 100% Solids Self Leveling is a two-component coating and proper mixing is required.
Mix base thoroughly to disperse pigment before mixing with activator. (This is the time to add in your pigment)
Mix 2 parts base to 1 part activator by volume for two minutes, material is immediately ready for use after mixing base and activator; no induction time required. Do not mix more material than can be used within the working time.
Pot Life NONE – GET IT OUT OF THE BUCKET! Approximately working time is 30-45 minutes at 70°F and 50% relative humidity. Higher temperatures or humidity will shorten pot-life and working time.
Application Procedure: Pour mixed material onto floor in a long bead approximately 12-18 inches wide. Do not drain or scrape remaining material in bucket.
Use either a flat or notched rubber squeegee and spread material to uniform thickness.
After material is spread, back-roll your material with a 3/8” shed-resistant woven roller cover.