Poly Gloss 85 Polyaspartic | High Gloss Topcoat System

Poly Gloss 85 is a professional grade, 85% solids polyaspartic topcoat designed for epoxy flooring systems that require high gloss, durability, and fast return to service. This two component 1:1 system delivers excellent chemical resistance, UV stability, and long term performance in both residential and commercial environments.

This product is intended for professional use only. Polyaspartic coatings require proper mixing, timing, and application technique to achieve the desired results. It is built for experienced installers who need consistent results, longer working time, and a finish that holds up under real world use.

Important Notice: Poly Gloss 85 Regular is NOT recommended for metallic epoxy floors. Because of its faster cure profile, standard polyaspartic orange peel texture will be evident. For metallic systems that require extended working time and a smoother, glass like finish, you must use Poly Gloss 85 Slow Go.

This product is most commonly used as the final seal coat for full flake, quartz, and solid color epoxy flooring systems. It can also be used as a base coat in applications exposed to direct sunlight where UV stability is required.

Unlike many polyaspartics, Poly Gloss 85 is formulated with no plasticizers. This eliminates tire staining and helps maintain the clean, high gloss appearance of the floor over time.

What Makes Poly Gloss 85 Different

• No plasticizers which eliminates tire staining
• Minimal elasticity prevents tire and equipment impressions
• High gloss finish for maximum visual impact
• 22 minute working time which is significantly longer than most polyaspartics
• UV stable and will not amber
• High build capability up to 10 mils without whitening
• Fast return to service

Working Time and Application Control

Poly Gloss 85 offers approximately 22 minutes of working time, which is 50 to 100 percent longer than most polyaspartic coatings. This allows installers to maintain control, work larger areas, and achieve a more consistent finish.

For projects that require even more working time, a slower version is available: Poly Gloss 85 Slow Go, which provides 60 to 90 minutes of working time. Poly Gloss 85 Slow Go is an ideal fit for any size metallic floor and larger solid color and light flake floors.

Because of its faster cure profile compared to slower polyaspartic systems, Poly Gloss 85 Regular is best suited for flake, quartz, and solid color floors where speed and durability are the priority.

Mixing Instructions

Poly Gloss 85 Regular is a 1:1 Base to Activator mixture.

• When mixing 2 gallons or less, use a 5 Gallon Paddle Mixer and mix for 2 minutes
• When mixing 3 or 4 gallons in a larger bucket, use a Box Mixer and mix for 2 minutes
• Always mix at 300 to 450 RPM

Proper mixing is critical to achieving consistent cure, clarity, and performance.

Coverage Rates

Full Flake Epoxy Floor Systems

• 133 to 150 Square Feet Per 1 Gallon Kit
• 266 to 300 Square Feet Per 2 Gallon Kit
• 399 to 450 Square Feet Per 3 Gallon Kit

Solid Color and Partial Flake Floors

• 150 to 175 Square Feet Per 1 Gallon Kit
• 300 to 350 Square Feet Per 2 Gallon Kit
• 350 to 525 Square Feet Per 3 Gallon Kit

Important Use Guidelines

• Professional use only – requires proper application technique and timing.
• Not recommended for metallic epoxy floors – standard polyaspartic orange peel texture will be evident.
• Best suited for full flake, partial flake, quartz, and solid color systems.
• For metallic floors, use Poly Gloss 85 Slow Go.

Application Equipment

For full flake systems, apply using a 24 Inch Flat Red Rubber Squeegee at 133 to 150 square feet per gallon.

For solid color and partial flake systems, use a Polyaspartic Application Tool Kit at 130 to 150 square feet per gallon.

Dry Time and Recoat Window

• Tack free in 2 to 4 hours
• Recoat window within 24 hours
• Full cure in 24 hours
• Heavy foot traffic in 24 hours
• Vehicular traffic in 24 hours

Frequently Asked Questions

What makes this different from other polyaspartics?
Poly Gloss 85 offers longer working time, no plasticizers, and higher gloss than most competing products.

Will this product yellow over time?
No. It is UV stable and will not amber.

Can this be used outdoors?
Yes. It is suitable for both indoor and outdoor applications.

How long do I have to work with it?
Approximately 22 minutes depending on temperature and conditions.

Why is no plasticizer important?
Plasticizers can lead to tire staining and surface issues. Poly Gloss 85 eliminates that problem.

Do I need a topcoat over epoxy?
Yes. A polyaspartic topcoat provides protection, UV stability, and long term durability.

What is the mix ratio for Poly Gloss 85?
It is a simple two component system with a 1:1 mix ratio of Base to Activator.

Can I use Poly Gloss 85 Regular over metallic epoxy floors?
No. Poly Gloss 85 Regular is not recommended for metallic systems. For metallic floors that require extended working time and a smoother finish, use Poly Gloss 85 Slow Go.

When can I drive on the floor after application?
Because of its fast return to service, vehicular traffic can resume in just 24 hours.

How thick can I apply this topcoat?
You can achieve a high build up to 10 mils without the product whitening or trapping moisture.