Metallic Dream Epoxy

Application Equipment:

18 inch Magic trowel
3/8” nap, woven, shed-resistant roller cover in 4, 9 , or 18 inch
2 inch chip brush
Installers use a variety of tools in order to get their desired design, everything from unwrapped rollers to leaf blowers!

Mixing Instructions:

Add your metallic pigment to Part A of Metallic Dream Epoxy Resin.
Mix at low speed for one minute (For best results let this mixture sit at a minimum of 1 hour all the way up to 24 hours so the powder can fully dissolve)
Then when ready to install add Epoxy Hardener (Part B) mix for additional 2 minutes continually sweeping sides and bottom of container.
Then wearing spiked shoes immediately pour mixed material on the floor.



Application Procedure:

Pour mixed material onto floor in a long bead approximately 12-18 inches wide. Do not drain or scrape remaining material in bucket.
Use a magic trowel to spread material and create your desired metallic epoxy design

How many kits do I need?

Square feet	Metallic	Solid Color or Flake	Prime  Coat
100ft²	1	1	1
200ft²	2	1	1
300ft²	2	1	1
400ft²	3	1	1
500ft²	4	2	1
600ft²	4	2	1
700ft²	5	2	2
800ft²	6	2	2
900ft²	6	3	2
1000ft²	7	3	2
1100ft²	8	3	2
1200ft²	8	3	2
1300ft²	9	4	3
1400ft²	10	4	3
1500ft²	10	4	3
1600ft²	11	4	3
1700ft²	12	5	3
1800ft²	12	5	3
1900ft²	13	5	4
2000ft²	14	5	4