2 Part Epoxy Primer
One Stop Epoxy Primer WB is a self-priming two component concrete floor system. Also provides a tough waterproof and scratch resistant interior concrete block wall coating system. Three parts resin to One part epoxy hardener.
Use One Stop Epoxy WB Epoxy Primer:
- Retail and Commercial Flooring
- Garage and Showroom Floors
- High-Traffic Interior Applications
- Restaurants and Bars
- Sports Arenas
- Automotive Service Areas
- Hair and Beauty Salon
- Commercial Kitchen
- Garages – Preferred Primer For Metallic Floors
- Aircraft Hangers
- Schools and Universities
Approved Top Coats
Solvent or Water-Based Urethane, 100% Solids Self Leveling Epoxy, and Metallic Dream Also approved for wood, concrete and laminate countertops.
Grind concrete floors to CSP-3, vacuum dust, wipe with denatured alcohol.
Mixing One Stop WB Epoxy Primer
Partial kits: If mixing less than a full kit, mix three Parts A to one Part B by volume at low speed mix for two minute.
Full kits: Open quart of Part B pour contents into the pail containing gallon of premeasured Part A. Stir with a jiffy mixer for 2 minutes to ensure material is mixed well. Avoid whipping air into the coating. Improper mixing may result in product outgassing.
Application
Mixed material can be poured on the floor and spread using a squeegee or for smaller projects it can dipped and rolled evenly with 3/8” epoxy roller.
Coverage per Kit
Dry time & Recoat
- Tack free/foot traffic: 12 hrs. Recoat 24 hrs.
- Heavy foot traffic 48 hrs. Vehicular Traffic 3 days.
- Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.
