Husqvarna PG 8 DR
$57,563.00
Husqvarna PG 8 DR
The PG 8 DR is a powerful remote-controlled planetary floor grinder with Dual Drive Technology™. This feature lets you adjust the grinding discs' rotation speed and direction independently of the drum. The machine is an excellent choice for all applications, from preparing to grinding and polishing concrete and stone floors. The mist cooler system cools the diamond tools, significantly increasing the removal rate and reducing the risk of glazing the tools (compared with not using the mist cooler system). If needed, the integrated adjustable weights can be used to increase grinding pressure and productivity.The all-new remote control enables precise operation and gives the operator control of important grinding parameters like real-time power consumption, incoming current, motor rpms and more. Ergonomic features like the integrated transport wheel make handling the machine easier before and after grinding.The hermetically sealed design of the grinding head and electrical cabinet, along with the robustness of the components, contributes to high reliability and low maintenance.
Features
High removal and total control
Enhanced remote-control unit
Protected electronics
Ergonomic and integrated transport wheel
Oscillation function for flatter floors
Ergonomic handle
Adjustable grinding pressure
Fleet ready
EZchange™ Airflow tool holders
Higher removal rate with mist cooler system
Sealed to last
Always a charged battery
Improved dust pick-up
Effortless transportation
Time saving tool change
Magnetic LED lights
Quick release of tool holders
Specifications
Type of operation
Remote-controlled
Remote-controlled
Power source
Corded
Corded
Direction of rotation
Both directions
Both directions
Grinding disc speed min
420 rpm
420 rpm
Voltage
200-240 V
440-480 V
Packaging length (Calc)
62.992 in
62.992 in
Packaging height (Calc)
57.874 in
57.874 in
Product size length
53.4 in
53.4 in
Frequency
50-60 Hz
50-60 Hz
Rated current
50 A
30 A
Product size height
44.8 in
44.8 in
Packaging width (Calc)
35.433 in
35.433 in
Product size width
33 in
33 in
Grinding width
31.5 in
31.5 in
Engine Power (As rated by the engine manufacturer)
22.1 hp
22.1 hp
Rated input power
22.1 hp
22.1 hp
Grinding disc diameter
10.6 in
10.6 in
Pins
3P+E
3P+E
Phases
3 ph
3 ph
Number of grinding discs
3
3
Article gross weight (Calc)
1,481.506 lbs
1,481.506 lbs
Weight
1,457 lbs
1,457 lbs
Grinding disc speed max
1,176 rpm
1,176 rpm
Husqvarna Blastrac BMG 2200RC
$357,831.00
Husqvarna Blastrac BMG 2200RC
The Blastrac BMG 2200RC is a heavy duty, ride-on floor grinding machine that is optimal for large horizontal surfaces and equipped with convenient remote control operation. The machine has two drive wheels fitted at the front and a swivel castor at the back that makes it easy to manoeuvre on and off jobsites. The operator sits in a comfortable seat with arm rests on both sides. Joysticks, push buttons and a touch screen offer effective and ergonomic operation. Each of the three powerful planetary grinding heads can be operated individually and deliver maximum coverage with effective distribution of grinding pressure on every head. Variable grinding speed, control of rotation direction and an independent suspension system are fitted as standard. The variable grinding pressure makes the BMG 2200RC a perfect match for every job. The machine features a powerful, integrated dust collecting system with HEPA 14 filters (which comply with OSHA regulations). This heavy duty system is equipped with an automatic pulse filter cleaning system, a Longopac® bagging system and a pre-separator is provided as standard.
Features
Optimal grinding results
More control
Time-saving tool change
Greater comfort
Flexibility
User-friendly touchscreen
Battery power for easy transportation
Increase productivity
Specifications
Type of operation
Ride-on or Remote-controlled
Power source
Corded
Direction of rotation
Both directions
Voltage
400-480 V
Grinding disc speed min
400 rpm
Packaging length (Calc)
141.732 in
Product size length
134 in
Rated current
124 A
Packaging width (Calc)
94.488 in
Product size width
87 in
Grinding width
85 in
Engine Power (As rated by the engine manufacturer)
83 hp
Packaging height (Calc)
78.74 in
Product size height
78 in
Frequency
50 Hz
Grinding disc diameter
9.5 in
Number of grinding discs
9
Article gross weight (Calc)
7,749.249 lbs
Weight
6,691 lbs
Pins
4P + E / 3P + E
Phases
3 ph
Grinding disc speed max
1,200 rpm
Husqvarna PG 450
$7,684.68
Husqvarna PG 450
PG 450 is a versatile and user-friendly planetary floor grinder. Perfect for a wide range of applications, e.g. coating removal, concrete grinding and concrete polishing. It is also suitable to use to make Husqvarna Superfloor™. With its 450 mm grinding width it is excellent for both small hard to get to areas, as well as larger surfaces. It is ideal for rental and both professional and semi-professional applications due to its many self-adjusting benefits. 1-phase means it is suitable for industrial and domestic applications. It can easily be folded and divided without tools for transport and storage.
Features
Highly versatile
Easy to use
Time saving tool change
Hour meter
Easy to transport and set-up
Efficient dust management
Ergonomic working position
Specifications
Direction of rotation
One direction
One direction
Power source
Corded
Corded
Grinding disc speed max
865 rpm
575 rpm
Article gross weight (Calc)
297.624 lbs
297.624 lbs
Weight
240.3 lbs
-
Voltage
220-240 V
100-120 V
Frequency
60 Hz
60 Hz
Product size length
52 in
57 in
Product size height
45 in
39 in
Packaging length (Calc)
38.189 in
38.189 in
Packaging height (Calc)
37.795 in
37.795 in
Packaging width (Calc)
22.047 in
22.047 in
Product size width
19 in
19 in
Grinding width
17.7 in
17.7 in
Rated current
13 A
15 A
Grinding disc diameter
7.1 in
7.1 in
Pins
3-pin
2-pin
Engine Power (As rated by the engine manufacturer)
3 hp
3 hp
Number of grinding discs
3
3
Phases
1 ph
1 ph
Grinding disc speed min
0 rpm
-
Trapezoid - Double Bar Segment...
from $199.99
Trapezoid - Double Bar Segments - Medium Bond - 20 Grit - Drilled Out
Trapezoid - Double Bar Segment...
from $199.99
Trapezoid - Double Bar Segments - Drilled Out - Soft Bond for Hard Concrete
These will fit a variety of grinding machines and with a wide range of segment configurations, bonds and grits.
Double segments offer longer life and typically perform better under heavier machines.
Our Rapida Cap Cutter Segments are ideal for faster grinding, while our Extremely Soft Bond tools are perfect for removing thicker coatings and adhesives.
Grizzly Professional Grade Hea...
$1,375.00
Grizzly Professional Grade Heavy Duty 17″ Floor Machine
Rugged Performance for Serious Surface Prep
The Grizzly XHD 17″ Floor Machine is built tough for professional epoxy installers and concrete prep crews. Whether you call it a swing machine, floor sander, or floor machine, this tool delivers unmatched durability and power for the most demanding floor prep tasks.
Reliable 1.5 HP Twin Capacitor Motor
Powered by a 1.5 HP twin capacitor AC motor, this machine runs at 175 RPM—ideal for scrubbing, sanding, or grinding concrete before epoxy application. Its heavier gear system delivers extra torque to drive a wide range of tools with ease.
Compatible with Your Favorite Tools
This machine is compatible with sanding drivers, brushes, pad holders, and optional weights. It’s engineered to be your daily workhorse for cleaning, prep, or finishing—no matter the job.
Key Features
1.5 HP twin capacitor AC motor with high torque output
Operates at 175 RPM for steady, consistent control
Durable gear drive system handles heavy daily use
Supports brushes, sanding drivers, and pad holders
Optional weight kit available for tougher grinding jobs
Also known as a swing machine, floor sander, or floor machine
Common Uses
Concrete surface preparation before epoxy coating
Deep scrubbing and cleaning
Light sanding and abrasion
Garage floors, commercial jobs, and warehouse prep
OneStopEpoxy.com where nationwide shipping on floor equipment is always free.
Husqvarna PG 6 P
$31,499.99
Husqvarna PG 6 P
A propane-powered version of our versatile Husqvarna PG 6 floor grinder. An integrated water tank enables wet grinding, while the propane engine eliminates the need for electrical access – making the PG 6 P the perfect choice for large outdoor concrete slabs. The electric fuel-injection system reduces fuel consumption, while the exhaust catalyst further lowers emissions. Key components are sealed against dust and slurry for maximum reliability and low maintenance. Adjustable weights are included with the grinder, providing extra grinding pressure and making the machine easy to handle, tilt and operate. For dry applications, combine your grinder with a Husqvarna cordless dust extractor. Use a Husqvarna slurry vacuum to manage slurry when wet grinding, or connect the PG 6 P to a Husqvarna cordless dust extractor to manage dust when dry grinding.
Features
Equipped for wet grinding
Adjustable grinding pressure
Hour and RPM meter
Exhaust catalyst
Time saving tool change
EZchange™ Airflow tool holders
Sealed to last
Improved dust pick-up
Ergonomic handle
Fuel injection
Fleet ready
Quick release of tool holders
Durable drive train
Specifications
Type of operation
Push
Power source
Propane
Direction of rotation
One direction
Motor/engine model
Command Pro EFI
Grinding disc speed min
870 rpm
Product size length
83.9 in
Packaging height (Calc)
57.992 in
Packaging length (Calc)
55 in
Product size height
45.8 in
Packaging width (Calc)
35 in
Product size width
26.7 in
Grinding width
25.2 in
Engine Power (As rated by the engine manufacturer)
22 hp
Grinding disc diameter
10.6 in
Number of grinding discs
3 pcs
Weight
1,140 lbs
Article gross weight (Calc)
1,104 lbs
Grinding disc speed max
1,010 rpm
Exhaust emissions (CO₂ EU V)
0 g/kWh
5-Star Rated Business
Positive feedback from a growing number of happy customersHassle-Free Checkout
Search for products, add them to cart, and checkout with easeNationwide Shipping
Across the United States with no minimum order requirementSatisfaction Guaranteed
We are a team of experienced floor installers ready to assist you