Torginol Basalt F-9309 Vinyl Flakes – 1/4" Flake Size Color Profile Basalt is a cool, neutral flake that brings a quiet sophistication to any epoxy floor. Designed with subtle blue undertones and a soft gray base, this flake creates a calm, refined surface that feels clean without being cold. It’s an ideal choice for spaces that benefit from a balanced, natural look — including garages, basements, entryways, and retail interiors. Basalt Is Made Up Of: 100% FB-127 (Basalt) from Torginol’s Varicolored Flake series, offering consistent, high-quality tone with just the right amount of depth. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Basalt flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – Available in 1, 2, and 3 Gallon Kits of PolyGloss Regular Cure or Our Famous Slow Go PolyGloss With 60 Minutes Of Working Time Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Basement Garage Man Cave Interior Rooms Porch Restaurant Hotel Lobby Patio Locker Room Sports Bar Showroom Floor Kitchen High-Traffic Areas

Black Vinyl Flakes – 1/4" Flake Size (F1050) Product Overview Black Vinyl Flakes (F1050) are a universally useful solid-color epoxy flake. Mix them with other colors to add contrast, depth, or a darker tone. Ideal for softening bright blends, toning down neutrals, or creating custom dark floors in garages, lanais, patios, and more. Key Features Solid-color black flakes for depth and contrast Pre-engineered 1/4" size for even coverage Compatible with all vinyl flake systems Adds balance without overpowering Recommended Uses Enhancing contrast in multicolor flake systems Balancing bright or neutral blends Custom dark epoxy garage, porch, patio, or lanai floors Residential and commercial installations Installation Notes Broadcast 1–5 lbs per 400 Square Feet of epoxy base coat Adjust flake rate based on desired coverage Remove excess flakes before sealing Seal with one of our Professional Grade Topcoats for best results See full line of vinyl flake colors to build your custom mix OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Cabin Fever Vinyl Flakes – 1/4" Flake Size (FB-127) Cabin Fever offers a warm, rustic blend of grays, creams, and soft whites designed to bring comfort and style to any epoxy floor. With a subtle contrast between earthy neutrals and a small accent of black, this flake blend delivers a lived-in look perfect for residential interiors, basements, and garage floors with character. It’s a popular choice for anyone wanting a finish that feels both grounded and welcoming. Cabin Fever Is Made Up Of: 30% Granite (F1410) – Light gray 30% Scone (F1780) – Beige-tan neutral 30% White (F1820) – Clean, soft white 10% Black (F1050) – Deep black accent Carefully balanced and UV-stable, Cabin Fever is part of Torginol’s Varicolored Flake series and delivers a finish that’s both inviting and durable. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Cabin Fever flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – 1, 2, and 3 Gallon Kits of Polyaspartic Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Basement Garage Man Cave Interior Rooms Porch Restaurant Hotel Lobby Patio Locker Room Sports Bar Showroom Floor Kitchen High-Traffic Areas OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Canary Yellow Vinyl Flakes – 1/4" Flake Size (F2200) Product Overview Canary Yellow Vinyl Flakes (F2200) are a vibrant solid-color flake used for decorative and functional epoxy floors. Ideal for themed installations, walkway highlights, or high-visibility areas in garages, lanais, patios, and more. Key Features Bright yellow flakes for high visibility Pre-engineered 1/4" size for uniform coverage Long-lasting color without fading Compatible with all One Stop Epoxy vinyl flake systems Recommended Uses Themed garage, lanai, and patio floors Walkway and pathway visibility Safety color coding in commercial spaces Accent highlights in residential and commercial projects Installation Notes Partial flake system: use Pigmented 100% Solids Epoxy as base coat and Urethane – WB – Gloss Satin Epoxy as top coat Full flake system: use Pigmented 100% Solids Epoxy as base coat and PolyGloss 85 Polyaspartic as top coat Broadcast flakes evenly and remove excess before sealing Seal with your preferred topcoat for durability and sheen OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Carbon Vinyl Flakes – 1/4" Flake Size (F9202) Product Overview Carbon Vinyl Flakes (F9202) showcase a captivating blend of black with subtle gray variegation. These flakes create a sophisticated and elegant finish ideal for epoxy floors in residential garages, patios, lanais, and commercial environments. Key Features Unique black and gray variegated pattern Pre-engineered 1/4" flake size for uniform coverage UV-stable for long-lasting color retention Compatible with all OneStopEpoxy vinyl flake systems Adds depth and visual interest without overpowering Recommended Uses Garage and workshop floors Commercial lobbies and retail spaces Patios, lanais, and outdoor entertaining areas Office interiors and showroom floors Installation Notes Broadcast 1–5 lbs per 40 lb base coat for desired coverage Remove excess flakes before applying topcoat Seal with PolyGloss 85 Polyaspartic or Urethane topcoat See full line of vinyl epoxy flake colors for complementary blends

Cherry Bomb Vinyl Flakes – 1/4" Flake Size (F9920) Product Overview Cherry Bomb Vinyl Flakes (F9920) are a solid red epoxy flake known for their bold color and high visibility. Ideal as an accent, these flakes add striking contrast and visual energy to garage floors, lanais, patios, and more. Key Features Vibrant solid red flakes for high-impact accent Pre-engineered 1/4" size for even distribution Compatible with all vinyl flake systems Long-lasting color retention Recommended Uses Accent color in multicolor blends Red highlights with Domino (FB-411) blends Themed epoxy floors in garages, lanais, patios Residential and commercial installations Installation Notes Broadcast 1–5 lbs per 400 Square Feet of epoxy base coat Adjust flake rate based on desired coverage Remove excess flakes before sealing Seal with one of our Professional Grade Topcoats for best results See full line of vinyl flake colors to build your custom mix OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Coyote Vinyl Flakes – 1/4" Flake Size (FB-514) Coyote is a balanced, neutral blend that brings together soft whites, tans, browns, and a touch of black for contrast. This versatile flake combination works beautifully in residential and commercial settings, especially where a grounded, welcoming feel is needed. Its neutral palette pairs well with nearly any base coat color and continues to grow in popularity for garage floors, basements, and living spaces alike. Coyote Is Made Up Of: 5% Black (F1050) – Bold contrast and definition 20% White (F1820) – Clean, bright tone 5% Chocolate (F5052) – Deep brown richness 20% F9957 – Light tan base 20% Alpaca White (F9958) – Warm off-white 20% Antique White (F9959) – Subtle vintage cream 10% Functional Gray (F9961) – Soft neutral gray This flake blend comes from Torginol’s Varicolored Flake series and is carefully balanced for visual harmony, subtle contrast, and wide appeal. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Coyote flakes into our Self-Leveling 100% Solids High Strength Epoxy lite Gray – 3 Gallon Kit For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray(For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – Available in 1, 2, and 3 Gallon Kits of PolyGloss Regular Cure or Our Famous Slow Go PolyGloss With 60 Minutes Of Working Time Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Restaurants Locker Rooms Bar Tops Hotel Lobbies Garage Man Cave Kitchen Porch Interior Living Areas Showroom Floors High-Traffic Areas Patio Basement OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Creekbed Vinyl Flakes – 1/4" Flake Size (FB-515) Creekbed is an earthy, natural blend of warm browns, soft beiges, and muted grays inspired by river rock and sunbaked stone. This popular Torginol blend is perfect for clients who want their floors to feel grounded and versatile, offering a natural look that works well in residential and commercial environments alike. It pairs especially well with tan or gray base coats. Creekbed Is Made Up Of: 3% Adobe Beige (F1000) – Soft, sandy neutral 3% Cocoa Brown (F1100) – Rich, chocolate accent 3% Putty (F5115) – Smooth beige-gray 25% Wigwam (F5116) – Medium-tone beige foundation 3% Porpoise (F5306) – Light cool gray 10% Tabu (F5305) – Taupe with natural tone 25% Antique White (F9959) – Warm, off-white balance 3% Gravy (F9982) – Creamy light beige 25% Stone (F9987) – Textured, natural gray This blend is part of Torginol’s Varicolored Flake series and is thoughtfully crafted to echo the natural tones of outdoor environments—bringing warmth and calm to indoor spaces. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and texture of resin-based flooring. They add color, depth, and light slip resistance, making epoxy floors more visually appealing and functional. One Stop Epoxy supplies only UV-stable, precision-screened flakes to ensure a clean, consistent finish on every job. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Creekbed flakes into our Self-Leveling 100% Solids High Strength Epoxy – Lite Gray – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with either PolyGloss 85 Regular Cure or PolyGloss 85 Slow Go Polyaspartic – Available in 1, 2, and 3 Gallon Kits. Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon. Recommended Uses Porch Hotel Lobbies Bar Tops Basement Locker Rooms Restaurants Garage Interior Living Areas Patio Showroom Floors Kitchen High-Traffic Areas Man Cave

Domino Vinyl Flakes – 1/4" Flake Size (FB-411) Domino (FB-411) is a bold, high-contrast flake blend that balances black, gray, and white in perfect proportion. Its clean, monochromatic palette offers a timeless look that works in both modern and traditional interiors. Whether you're designing a showroom, garage, or basement floor, Domino provides a striking visual impact while remaining neutral enough to complement almost any space or color scheme. Domino Is Made Up Of: 33% Black (F1050) – Strong base and contrast 33% Granite (F1410) – Light-to-medium gray 33% White (F1820) – Bright, clean white This well-balanced flake blend is part of Torginol’s Varicolored Flake series and is one of the most recognized color combinations in the epoxy flooring world. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Domino flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – Regular or Slow Go, 1–3 Gallon Kits Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Showroom Floors Interior Living Areas Man Cave Garage Hotel Lobbies Porch Kitchen Bar Tops Restaurants Locker Rooms High-Traffic Areas Patio Basement

Royal Blue Epoxy Pigment – 32oz for 3-Gallon 100% Solids Epoxy

Black Epoxy Pigment – 32oz for 3-Gallon Kit Product Overview One Stop Epoxy’s Black Epoxy Pigment delivers bold, deep color saturation with full coverage and consistency. Each 32oz container is pre-measured to pigment 3 gallons of 100% solids epoxy, ensuring no thin spots or streaks. Key Features Pre-measured 32oz container for 3-gallon kits High-viscosity formula for even pigment suspension True black color with full opacity Resists fading, streaking, and color shifting Ideal for solid color or high-contrast flake systems Recommended Uses Solid black garage, showroom, and industrial floors Base coats in monochrome or black-and-white flake systems Accent borders, stencil work, and logo inlays Commercial and retail floor applications Installation Notes Add full 32oz container to 3 gallons of mixed 100% solids epoxy Stir with a paddle until pigment disperses evenly Avoid high-speed mixing to minimize air bubbles Apply base coat per standard epoxy installation guidelines

Light Gray Epoxy Pigment – 32oz for 3-Gallon Kit Product Overview One Stop Epoxy’s Light Gray Epoxy Pigment delivers a soft, clean gray tone for 100% solids epoxy floors. Each 32 oz container is pre-measured to pigment exactly 3 gallons of epoxy, ensuring full coverage and consistent color without streaks or shade variation. Key Features Pre-measured 32 oz container for 3 gal kits Contractor-grade formula with deep opacity Clean, neutral gray tone for versatile applications High-viscosity blend resists settling Easy mixing for predictable results Engineered specifically for 100% solids epoxy Recommended Uses Solid color garage and utility floors Base coats for vinyl flake epoxy systems Light commercial and retail spaces Showrooms and reception areas Installation Notes Add entire 32 oz container to 3 gal of mixed epoxy Stir with a paddle until pigment is fully dispersed Avoid high-speed mixing to reduce air entrapment Apply base coat per standard epoxy installation guidelines