Wombat Vinyl Flakes – 1/4" Flake Size (FB-616)
Wombat (FB-616) is a bold and balanced flake blend that layers deep charcoal and black with lighter tones of whisper gray and white. This color combination offers contrast without overpowering the space, making it ideal for projects that need a clean, modern appearance with just the right touch of intensity. Wombat works well across a variety of residential and commercial applications where a refined, high-contrast look is desired.
Wombat Is Made Up Of:
-
15% Black (F1050) – Strong, grounding base
-
55% Charcoal (F1090) – Deep, rich gray
-
15% Whisper Gray (F1800) – Soft, subtle mid-tone
-
15% White (F1820) – Clean and crisp contrast
This eye-catching blend from Torginol’s Varicolored Flake series creates a structured, professional finish while remaining versatile enough for many environments.
What Are Vinyl Flakes?
Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time.
Installing An Epoxy Flake Floor System
Recommended Uses
-
Garage
-
Locker Rooms
-
Porch
-
Interior Living Areas
-
Man Cave
-
Restaurants
-
Kitchen
-
Patio
-
Hotel Lobbies
-
Bar Tops
-
High-Traffic Areas
-
Basement
-
Showroom Floors
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
