Urethane - WB Epoxy Top Coat - Gloss or Satin

$124.99

Finish

Gloss Satin White Gloss Light Gray Gloss

Urethane - WB Epoxy Top Coat - Gloss or Satin

$124.99

Finish

Gloss Satin White Gloss Light Gray Gloss

Availability: In Stock. Products will be delivered between 1 and 5. In-store Pickup Available.

Description TDS / SDS Instructions How much do I need?

One Stop Epoxy Urethane - WB

One Stop Epoxy Urethane - WB is a two component system with excellent scratch and chemical resistance in an easy to mix 3:1 kit consisting of 3 parts urethane resin to one-part catalyst by volume. One Stop Epoxy Urethane is water based and available in Glass, Satin, and Matt and 1, 4, and 15 gallon kits.

Use One Stop Epoxy Urethane - WB As a Seal Coat For

  • Retail and Commercial Flooring
  • Garage and Showroom Floors
  • High-Traffic Interior Applications
  • Restaurants and Bars
  • Sports Arenas
  • Automotive Service Areas
  • Hair and Beauty Salon
  • Commercial Kitchen
  • Garages – Preferred Seal Coat For Partial Flake Floors
  • Aircraft Hangers
  • Schools and Universities
  • Can also be used directly on a concrete floor for a very durable and cost effective grind and seal.

Approved Basecoats for Urethane - WB

Water-based or 100% solids epoxy:

Surface Prep & Priming

When applying over epoxy, grind concrete floors to CSP-3, vacuum dust, wipe with denatured alcohol and apply epoxy.

No need to sand when apply as epoxy seal coat within 24 hours of application of waterbase or 100% solids epoxy. A chemical bond will form.

Sand first when applying as epoxy seal coat after 25 hours of application to 100% solids epoxy to form a mechanical bond.

When applying directly to a concrete floor for a grind and seal, Grind concrete floors to a CSP that provides the texture you’re looking for, vacuum dust, wipe with Denatured alcohol apply Tru-Alpha Water-Based Urethane clear or pigmented directly to the concrete. ( a second or third coat may be applied to attain the desired look or level of durability.)

Mixing One Stop Epoxy Urethane - WB

Partial kits: If mixing less than a full kit, mix three Parts A to one Part B by volume at low speed mix for two minute.

Full kits: Open quart of Part B pour contents into the pail containing gallon of premeasured Part A. Stir with a jiffy mixer for 2 minutes to ensure material is mixed well. Avoid whipping air into the coating. Improper mixing may result in product outgassing.

Recommended: Add 8-10oz of water for increased ease of usability and smoothness

Application

Mixed material can be dipped and rolled evenly with 3/16” nap roller to maintain the desired thickness. Back rolling is recommended to obtain uniform finish. Add Aluminum Oxide for slip resistance if desired.

Coverage per Kit

  • Topcoat for Metallic Floors 500-600 sqft
  • Topcoat for Solid color floors 500-600 sqft
  • Topcoat for Flake floors 400-500 sqft
  • Pigmented Urethane 400 sqft 

Best if applied at temperatures between 55-90 degrees Fahrenheit.

 


Dry time & Recoat

  • Tack free/foot traffic: 6-8 hrs. Recoat 12-24 hrs.
  • Heavy foot traffic 48 hrs. Vehicular Traffic 3 days.
  • Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.
Mixing:
  1. (Optional) Add 8-12 ounces of filtered water to part A of the urethane and mix it for one minute
  2. Pour part B into your part A and proceed to mix them together for two minutes with a low speed drill and Helix mixer
  3. Pour your urethane into a painters tray carefully as to not introduce air into the mixture
Application:
  1. Dip a 3/16 inch nap shed resistant roller into your painters try
  2. Starting in the corner of your floor begin by rolling out your urethane moving your roller in a back and forth motion not rolling more than a few feet at a time
  3. Re-dip your roller and repeat slightly overlapping 
  4. Complete entire floor by coating wall to wall moving front to back 
  5. Proceed to back-roll material before it begins to tack up
  • You'll have 45 minutes to roll out the whole can covering 400-500ft² 
  • It should only take you 20-30 minutes depending upon experience 
How many kits do I need?
 Square feetMetallic Solid Color
or Flake
Grind & Seal
(2 Coats)
 100ft² 111
 200ft² 111
 300ft² 112
 400ft² 113
 500ft² 114
 600ft² 224
 700ft² 225
 800ft² 225
 900ft² 226
 1000ft² 226
 1100ft² 337
 1200ft² 337
 1300ft² 338
 1400ft² 338
 1500ft² 339
 1600ft² 449
 1700ft² 4410
 1800ft²4410
 1900ft² 4412
 2000ft² 4413

One Stop Epoxy Urethane - WB

One Stop Epoxy Urethane - WB is a two component system with excellent scratch and chemical resistance in an easy to mix 3:1 kit consisting of 3 parts urethane resin to one-part catalyst by volume. One Stop Epoxy Urethane is water based and available in Glass, Satin, and Matt and 1, 4, and 15 gallon kits.

Use One Stop Epoxy Urethane - WB As a Seal Coat For

  • Retail and Commercial Flooring
  • Garage and Showroom Floors
  • High-Traffic Interior Applications
  • Restaurants and Bars
  • Sports Arenas
  • Automotive Service Areas
  • Hair and Beauty Salon
  • Commercial Kitchen
  • Garages – Preferred Seal Coat For Partial Flake Floors
  • Aircraft Hangers
  • Schools and Universities
  • Can also be used directly on a concrete floor for a very durable and cost effective grind and seal.

Approved Basecoats for Urethane - WB

Water-based or 100% solids epoxy:

Surface Prep & Priming

When applying over epoxy, grind concrete floors to CSP-3, vacuum dust, wipe with denatured alcohol and apply epoxy.

No need to sand when apply as epoxy seal coat within 24 hours of application of waterbase or 100% solids epoxy. A chemical bond will form.

Sand first when applying as epoxy seal coat after 25 hours of application to 100% solids epoxy to form a mechanical bond.

When applying directly to a concrete floor for a grind and seal, Grind concrete floors to a CSP that provides the texture you’re looking for, vacuum dust, wipe with Denatured alcohol apply Tru-Alpha Water-Based Urethane clear or pigmented directly to the concrete. ( a second or third coat may be applied to attain the desired look or level of durability.)

Mixing One Stop Epoxy Urethane - WB

Partial kits: If mixing less than a full kit, mix three Parts A to one Part B by volume at low speed mix for two minute.

Full kits: Open quart of Part B pour contents into the pail containing gallon of premeasured Part A. Stir with a jiffy mixer for 2 minutes to ensure material is mixed well. Avoid whipping air into the coating. Improper mixing may result in product outgassing.

Recommended: Add 8-10oz of water for increased ease of usability and smoothness

Application

Mixed material can be dipped and rolled evenly with 3/16” nap roller to maintain the desired thickness. Back rolling is recommended to obtain uniform finish. Add Aluminum Oxide for slip resistance if desired.

Coverage per Kit

  • Topcoat for Metallic Floors 500-600 sqft
  • Topcoat for Solid color floors 500-600 sqft
  • Topcoat for Flake floors 400-500 sqft
  • Pigmented Urethane 400 sqft 

Best if applied at temperatures between 55-90 degrees Fahrenheit.

 


Dry time & Recoat

  • Tack free/foot traffic: 6-8 hrs. Recoat 12-24 hrs.
  • Heavy foot traffic 48 hrs. Vehicular Traffic 3 days.
  • Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.
Tags:
Top Coat
0 watching this item.
0 have this item in their cart.
Previous Product Next Product

5-Star Rated Business

Positive feedback from a growing number of happy customers

Hassle-Free Checkout

Search for products, add them to cart, and checkout with ease

Nationwide Shipping

Across the United States with no minimum order requirement

Satisfaction Guaranteed

We are a team of experienced floor installers ready to assist you