Outback Vinyl Flakes – 1/4" Flake Size (FB-517) Outback (FB-517) is a warm and energetic flake blend designed to make a statement. With earthy tones of tan and brown offset by a punch of salmon and grounded with crisp white, this color combination brings depth, personality, and just the right amount of boldness to any epoxy flooring project. It’s a great option for both residential and commercial applications where a natural yet dynamic design is desired. Outback Flake Composition 20% Autumn Brown (F1040) – Rich, earthy tone 10% Black (F1050) – Deep base tone that adds contrast and structure 10% Brown (F1060) – Warm, natural hue that grounds the palette 15% Salmon (F1770) – Warm orange accent 35% Tan (F1785) – Light, sandy beige 10% White (F1820) – Bright contrast This Torginol Varicolored Flake blend delivers a grounded yet adventurous look that complements a wide range of interior and exterior floor spaces. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Outback flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Tan (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 Polyaspartic Topcoat – Regular or Slow Go. Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat. Recommended Uses Hotel Lobbies Locker Rooms Bar Tops Man Cave Restaurants Showroom Floors Porch Kitchen Interior Living Areas Garage Patio Basement High-Traffic Areas

Shoreline Vinyl Flakes – 1/4" Flake Size (FB-461) Shoreline (FB-461) is a calm, neutral flake blend from Torginol’s Varicolored Flake series. This combination of soft beige, warm brown, light ivory, and subtle black delivers a balanced, natural appearance. It’s a great choice for anyone seeking a timeless epoxy floor that complements both modern and traditional interiors. Shoreline Is Made Up Of: 11% Autumn Brown (F1040) – Warm, earthy brown 6% Black (F1050) – Subtle depth and contrast 33% Ivory (F1425) – Light cream neutral 50% Scone (F1780) – Soft beige foundation This flake blend is ideal for residential or commercial settings where understated beauty and long-term performance are key. What Are Vinyl Flakes? Vinyl flakes are decorative color elements used in resin floor systems. They bring texture, depth, and visual appeal to epoxy floors while adding light slip resistance. One Stop Epoxy only offers UV-stable, precision-blended flakes designed to deliver a professional, clean finish. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Shoreline flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Tan. (For professional or highly experienced users only.) Seal full flake systems with PolyGloss 85 Regular Cure or PolyGloss 85 Slow Go. Seal partial flake systems with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon. Recommended Uses Kitchen Man Cave Interior Living Areas Porch Garage Bar Tops Hotel Lobbies Showroom Floors High-Traffic Areas Patio Restaurants Locker Rooms Basement OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Tidal Wave Vinyl Flakes – 1/4" Flake Size (FB-807) Tidal Wave (FB-807) is a coastal-inspired flake blend that mixes white, gray, beige, and cool blue tones to create a fresh, energetic finish. Designed to add subtle color and movement without being overpowering, this blend is ideal for garages, rec rooms, and interiors looking for a splash of style with a clean, professional appearance. Tidal Wave Is Made Up Of: 20% White (F1820) – Bright, crisp base 10% Stormy Blue (F6621) – Rich navy blue tone 20% Online (F9903) – Soft modern gray 20% Alpaca White (F9958) – Clean off-white 20% Antique White (F9959) – Warm, soft beige 10% Moody Blue (F9972) – Cool blue-gray accent This blend is part of Torginol’s Varicolored Flake series and remains a favorite among installers for its versatility and visual interest. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used in resin-based floor coatings to add texture, color, and light slip resistance. One Stop Epoxy only supplies UV-stable, precision-screened flakes that deliver a consistent, professional finish. Installing An Epoxy Flake Floor System For a full flake broadcast system, use LabPox 30 100% Solids Epoxy as your base coat. For a faster install, use LabFast (+) Low Odor - 85 T.C. Clear and 2 LabSurface Universal Pigment Pods per kit of epoxy. (Recommended for experienced installers only.) Top coat full flake systems with LabFast (+) Low Odor - 85 T.C. Clear. Top coat partial flake systems with AQUALAB Urethane Pure Gloss. Recommended Uses Garage Basement Interior Living Areas Patio Porch Bar Tops Restaurants Showroom Floors Hotel Lobbies Locker Rooms Man Cave Kitchen High-Traffic Areas OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Wombat Vinyl Flakes – 1/4" Flake Size (FB-616) Wombat (FB-616) is a bold and balanced flake blend that layers deep charcoal and black with lighter tones of whisper gray and white. This color combination offers contrast without overpowering the space, making it ideal for projects that need a clean, modern appearance with just the right touch of intensity. Wombat works well across a variety of residential and commercial applications where a refined, high-contrast look is desired. Wombat Is Made Up Of: 15% Black (F1050) – Strong, grounding base 55% Charcoal (F1090) – Deep, rich gray 15% Whisper Gray (F1800) – Soft, subtle mid-tone 15% White (F1820) – Clean and crisp contrast This eye-catching blend from Torginol’s Varicolored Flake series creates a structured, professional finish while remaining versatile enough for many environments. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Wombat flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray(For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – Available in 1, 2, and 3 Gallon Kits of PolyGloss Regular Cure or Our Famous Slow Go PolyGloss With 60 Minutes Of Working Time Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Garage Locker Rooms Porch Interior Living Areas Man Cave Restaurants Kitchen Patio Hotel Lobbies Bar Tops High-Traffic Areas Basement Showroom Floors OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.