One Stop Epoxy 150 Fast Cure 100% Solids Epoxy
One Stop Epoxy 150 Fast Cure 100% Solids Epoxy is a high-performance, fast-curing, two-component epoxy designed for heavy-duty floor protection and quick turnaround times. With a built-in Moisture Vapor Barrier (MVB) that resists up to 12 pounds of moisture, this versatile epoxy acts as a primer, base coat, and MVB in one convenient application. It is perfect for projects requiring fast drying, such as one-day full flake floors and other broadcast systems.
Ideal for full flake floors, sand broadcasts, and as a base coat for a multi-layer quartz systems when a MVB is required, 150FC Fast Cure Epoxy provides the speed and durability you need for high-traffic areas like garages, showrooms, restaurants, commercial kitchens, and industrial settings. Drying in as little as 90 minutes, it allows for fast installations, making it a popular choice for contractors looking for quick turnaround solutions.
Key Features and Benefits
- Seamless, high-build coating
- Excellent adhesion and chemical resistance
- Impact resistant and abrasion resistant
- Fast curing—ready for topcoat in 90 minutes in warmer climates
- Solvent-free, low-maintenance formula
- Built-in moisture vapor barrier (up to 12 lbs)
- Ideal for One Stop Epoxy Vinyl Epoxy Flakes and other broadcast systems
- Pairs with PolyGloss 85 Polyaspartic Topcoat for enhanced durability
Application Uses
Full Flake Floors: Use 150FC Fast Cure Epoxy as the base coat in full broadcast flake systems. Once the base coat is applied, broadcast vinyl flakes across the surface to rejection. The One Stop Epoxy Vinyl Epoxy Flakes are perfect for creating durable, decorative floors that resist wear and tear. Finish the system with PolyGloss 85 Polyaspartic Topcoat for an added layer of protection and a long-lasting, glossy finish.
Sand Broadcast Systems: For slip-resistant surfaces, apply kiln-dried sand across the base coat for an industrial-grade non-slip finish. Once the sand has set, seal the surface with PolyGloss 85 Polyaspartic Topcoat or another topcoat for extra durability.
Quartz Broadcast Floors: Ideal as a base coat for multi-layer quartz systems, this fast cure epoxy ensures solid adhesion and a quick return to service, making it perfect for commercial and industrial environments.
Available Colors
- Tan
- White
- Light Gray
- Black
Approximate Coverage
- Pigmented receiver coat for vinyl chips: 133-150 SFPG
- Primer on porous concrete: 150-200 SFPG
- Commercial and industrial applications: 100-135 SFPG
- Metallic floors base coat: 135-150 SFPG
One Stop Epoxy 150 Fast Cure 100% Solids Epoxy is the ideal base coat solution for broadcast systems that require both speed and reliability. Whether you're installing a full flake floor or creating a slip-resistant industrial surface, this fast-curing epoxy delivers superior results with minimal downtime.
One Stop Epoxys standard resin is a 2 to 1 ratio 100% solids, two-component, high-build epoxy floor coating that’s designed for applications where heavy-duty protection is required.
Our Epoxy is easy-to-use, self-leveling, and delivers a high-gloss and chemically resistant surface. Combine with Decorative Chips, quartz, or Metallic Additive systems to create an attractive and durable finish or broadcast non-slip aggregates to produce a non-slip surface.
Application Equipment:
Flat – 3/16 inch notched rubber squeegee Rollers
3/8” nap, woven, shed-resistant roller cover in 4, 9 , or 18 inch.
2 inch chip brush
Mixing: 100% Solids Self Leveling is a two-component coating and proper mixing is required.
Mix base thoroughly to disperse pigment before mixing with activator. (This is the time to add in your pigment)
Mix 2 parts base to 1 part activator by volume for two minutes, material is immediately ready for use after mixing base and activator; no induction time required. Do not mix more material than can be used within the working time.
Pot Life NONE – GET IT OUT OF THE BUCKET! Approximately working time is 30-45 minutes at 70°F and 50% relative humidity. Higher temperatures or humidity will shorten pot-life and working time.
Application Procedure:
Pour mixed material onto floor in a long bead approximately 12-18 inches wide. Do not drain or scrape remaining material in bucket.
Use either a flat or notched rubber squeegee and spread material to uniform thickness.
After material is spread, back-roll your material with a 3/8” shed-resistant woven roller cover.
Tips:
DO NOT BACKROLL MATERIAL AFTER IT BEGINS TO TACK-UP.
