Moisture Vapor Barrier

One Stop Epoxys standard resin is a 2 to 1 ratio 100% solids, two-component, high-build epoxy floor coating that’s designed for applications where heavy-duty protection is required.

Our Epoxy is easy-to-use, self-leveling, and delivers a high-gloss and chemically resistant surface. Combine with Decorative Chips, quartz, or Metallic Additive systems to create an attractive and durable finish or broadcast non-slip aggregates to produce a non-slip surface.

Application Equipment:

Flat – 3/16 inch notched rubber squeegee Rollers
3/8” nap, woven, shed-resistant roller cover in 4, 9 , or 18 inch.
2 inch chip brush

Mixing: 100% Solids Self Leveling is a two-component coating and proper mixing is required.

Mix base thoroughly to disperse pigment before mixing with activator. (This is the time to add in your pigment)
Mix 2 parts base to 1 part activator by volume for two minutes, material is immediately ready for use after mixing base and activator; no induction time required. Do not mix more material than can be used within the working time.

Pot Life NONE – GET IT OUT OF THE BUCKET! Approximately working time is 30-45 minutes at 70°F and 50% relative humidity. Higher temperatures or humidity will shorten pot-life and working time.

Application Procedure:

Pour mixed material onto floor in a long bead approximately 12-18 inches wide. Do not drain or scrape remaining material in bucket.
Use either a flat or notched rubber squeegee and spread material to uniform thickness.
After material is spread, back-roll your material with a 3/8” shed-resistant woven roller cover.

Tips:

DO NOT BACKROLL MATERIAL AFTER IT BEGINS TO TACK-UP.