Tidal Wave Vinyl Flakes – 1/4" Flake Size (FB-807)
Tidal Wave (FB-807) is a coastal-inspired flake blend that mixes white, gray, beige, and cool blue tones to create a fresh, energetic finish. Designed to add subtle color and movement without being overpowering, this blend is ideal for garages, rec rooms, and interiors looking for a splash of style with a clean, professional appearance.
Tidal Wave Is Made Up Of:
-
20% White (F1820) – Bright, crisp base
-
10% Stormy Blue (F6621) – Rich navy blue tone
-
20% Online (F9903) – Soft modern gray
-
20% Alpaca White (F9958) – Clean off-white
-
20% Antique White (F9959) – Warm, soft beige
-
10% Moody Blue (F9972) – Cool blue-gray accent
This blend is part of Torginol’s Varicolored Flake series and remains a favorite among installers for its versatility and visual interest.
What Are Vinyl Flakes?
Vinyl flakes are decorative aggregates used in resin-based floor coatings to add texture, color, and light slip resistance. One Stop Epoxy only supplies UV-stable, precision-screened flakes that deliver a consistent, professional finish.
Installing An Epoxy Flake Floor System
Recommended Uses
- Garage
- Basement
- Interior Living Areas
- Patio
- Porch
- Bar Tops
- Restaurants
- Showroom Floors
- Hotel Lobbies
- Locker Rooms
- Man Cave
- Kitchen
- High-Traffic Areas
OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
