Premera Crystal Densifier – Fast-Acting Concrete Densifier for a Mirror Finish
Premera Crystal Densifier is an essential part of the One Day Polish system, designed to densify and polish concrete surfaces efficiently. This advanced product forms a crystal-clear, quartz-mineral barrier both within and on top of the concrete, providing excellent chemical resistance and long-lasting durability.
Premera Crystal Densifier is applied directly to 100 transitional profile concrete, allowing you to skip resin applications and proceed straight to burnishing. After one hour, the surface can be burnished with up to a 3000 grit diamond pad, producing a stunning, mirror-like finish. This process significantly reduces labor time while ensuring superior hardness and resistance for high-traffic areas.
For optimal protection, follow up with Premera's Crystal Guard which adds a layer of stain and abrasion resistance to your polished concrete, ensuring long-term durability against common food and drink spills.
Key Features
-
Sol-Gel Based SiO2 Densifier: Enhances surface density and strength.
-
Easy Application: Spray-on formula for 100 transitional finish.
-
Fast Burnishing: Begin burnishing 1 hour after application.
-
No Resins Needed: Skip straight to burnishing with diamond pads.
-
Mirror Finish: Achieve high gloss with up to a 3000 grit pad.
-
Durable Protection: Forms a dense, polishable surface layer.
For enhanced protection, complete your concrete polishing system with Premera's Crystal Guard
Stir the contents thoroughly to re-suspend the nano particles that have settled to the bottom. (You should feel a thick layer of sediment with your stir stick in the bottom of the container. This all has to be re-suspended in the liquid to ensure performance of the coating). Make certain to re-stir every 15-20 minutes to re-suspend the settling nano particles during the application process to ensure proper performance of the coating.
- Spraying:
When surface preparation is complete and surface is dry and free of dust, begin application using an acetone sprayer with a 1.0-1.3 size tip. Spray one coat in a cross-pattern; left to right, then up and down. This will provide sufficient coverage and will help prevent holes in coverage. (Exception for one coat is on unpainted steel or iron, which requires 2 coats wet on tack) Desired wet film thickness (WFT) is approximately 2.0 to 2.5 mils. To spray small pieces or tight locations, you can use a “Preval” sprayer. This is a small disposable sprayer that can spray any liquid and holds approximately 6 oz, which is ideal for touch ups as well.
