Coyote Vinyl Flakes – 1/4" Flake Size (FB-514)
Coyote is a balanced, neutral blend that brings together soft whites, tans, browns, and a touch of black for contrast. This versatile flake combination works beautifully in residential and commercial settings, especially where a grounded, welcoming feel is needed. Its neutral palette pairs well with nearly any base coat color and continues to grow in popularity for garage floors, basements, and living spaces alike.
Coyote Is Made Up Of:
-
5% Black (F1050) – Bold contrast and definition
-
20% White (F1820) – Clean, bright tone
-
5% Chocolate (F5052) – Deep brown richness
-
20% F9957 – Light tan base
-
20% Alpaca White (F9958) – Warm off-white
-
20% Antique White (F9959) – Subtle vintage cream
-
10% Functional Gray (F9961) – Soft neutral gray
This flake blend comes from Torginol’s Varicolored Flake series and is carefully balanced for visual harmony, subtle contrast, and wide appeal.
What Are Vinyl Flakes?
Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time.
Installing An Epoxy Flake Floor System
Recommended Uses
-
Restaurants
-
Locker Rooms
-
Bar Tops
-
Hotel Lobbies
-
Garage
-
Man Cave
-
Kitchen
-
Porch
-
Interior Living Areas
-
Showroom Floors
-
High-Traffic Areas
-
Patio
-
Basement
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
