Schist Vinyl Flakes – 1/4" Flake Size (F9307)
Product Overview
Schist Vinyl Flakes (F9307) are a light, subtle, and neutral flooring option featuring a white base with grey variegation and cool undertones. Ideal for creating serene and refined epoxy floors in both residential and commercial spaces.
Key Features
- Light neutral tone with white base and grey variegation
- 1/4" flake size for consistent coverage
- Compatible with all OneStopEpoxy vinyl flake systems
- UV-stable and long-lasting color retention
- Sophisticated and versatile appearance
Recommended Uses
- Residential garages, lanais, and patios
- Commercial lobbies and retail spaces
- Office interiors and conference rooms
- Showrooms and gallery floors
Installation Notes
- Broadcast flakes evenly at 1–2 lbs per 40 lb base coat
- Intermix variegated lots before use to ensure color consistency
- Remove excess flakes before sealing
- Seal with PolyGloss 85 Polyaspartic or Urethane topcoat
OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
