Creekbed Vinyl Flakes – 1/4" Flake Size (FB-515) Creekbed is an earthy, natural blend of warm browns, soft beiges, and muted grays inspired by river rock and sunbaked stone. This popular Torginol blend is perfect for clients who want their floors to feel grounded and versatile, offering a natural look that works well in residential and commercial environments alike. It pairs especially well with tan or gray base coats. Creekbed Is Made Up Of: 3% Adobe Beige (F1000) – Soft, sandy neutral 3% Cocoa Brown (F1100) – Rich, chocolate accent 3% Putty (F5115) – Smooth beige-gray 25% Wigwam (F5116) – Medium-tone beige foundation 3% Porpoise (F5306) – Light cool gray 10% Tabu (F5305) – Taupe with natural tone 25% Antique White (F9959) – Warm, off-white balance 3% Gravy (F9982) – Creamy light beige 25% Stone (F9987) – Textured, natural gray This blend is part of Torginol’s Varicolored Flake series and is thoughtfully crafted to echo the natural tones of outdoor environments—bringing warmth and calm to indoor spaces. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and texture of resin-based flooring. They add color, depth, and light slip resistance, making epoxy floors more visually appealing and functional. One Stop Epoxy supplies only UV-stable, precision-screened flakes to ensure a clean, consistent finish on every job. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Creekbed flakes into our Self-Leveling 100% Solids High Strength Epoxy – Lite Gray – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with either PolyGloss 85 Regular Cure or PolyGloss 85 Slow Go Polyaspartic – Available in 1, 2, and 3 Gallon Kits. Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon. Recommended Uses Porch Hotel Lobbies Bar Tops Basement Locker Rooms Restaurants Garage Interior Living Areas Patio Showroom Floors Kitchen High-Traffic Areas Man Cave

Domino Vinyl Flakes – 1/4" Flake Size (FB-411) Domino (FB-411) is a bold, high-contrast flake blend that balances black, gray, and white in perfect proportion. Its clean, monochromatic palette offers a timeless look that works in both modern and traditional interiors. Whether you're designing a showroom, garage, or basement floor, Domino provides a striking visual impact while remaining neutral enough to complement almost any space or color scheme. Domino Is Made Up Of: 33% Black (F1050) – Strong base and contrast 33% Granite (F1410) – Light-to-medium gray 33% White (F1820) – Bright, clean white This well-balanced flake blend is part of Torginol’s Varicolored Flake series and is one of the most recognized color combinations in the epoxy flooring world. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Domino flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Light Gray (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 – Regular or Slow Go, 1–3 Gallon Kits Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon Recommended Uses Showroom Floors Interior Living Areas Man Cave Garage Hotel Lobbies Porch Kitchen Bar Tops Restaurants Locker Rooms High-Traffic Areas Patio Basement

Lime Green Vinyl Flake – 1/4" Flake Size (F5102) Lime Green (F5102) is a bright, standout flake often used in creative or highly personalized epoxy floor designs. With its vibrant tone and bold presence, this color is typically chosen for visual impact rather than blending. It’s a personal preference pick, great for clients looking to do something unique and unconventional. Installation Notes Installing a partial flake floor system? You'll need our Urethane Gloss/Satin Epoxy Top Coat and 100% Solids Industrial Grade Epoxy– Light Gray as your base coat. For a full flake floor system, use PolyGloss 85 Polyaspartic as your top coat and Metallic Dream Epoxy as your base coat. Recommended Uses Garage floors Showroom designs Custom residential installs Accent flake in artistic blends Creative commercial applications OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Orange Vinyl Flakes – 1/4" Flake Size (F2160) Product Overview Orange Vinyl Flakes (F2160) deliver vibrant energy and high visibility to any epoxy floor. Ideal for theme-based installations, safety color coding, or bright orange finishes in garages, lanais, patios, and more. Key Features Bold solid-color orange flakes for maximum impact Pre-engineered 1/4" size for uniform coverage High visibility for safety and design accents Compatible with all OneStopEpoxy vinyl flake systems Recommended Uses Standalone orange floors in residential and commercial spaces Theme-based epoxy installations Safety color coding in garages, workshops, and facilities Accent highlights in patios, lanais, and pool decks Installation Notes Partial flake system: use Pigmented 100% Solids Epoxy as base coat and Urethane – WB – Gloss Satin Epoxy as top coat Full flake system: use Pigmented 100% Solids Epoxy as base coat and PolyGloss 85 Polyaspartic as top coat Broadcast flakes evenly and remove excess before sealing Seal with your preferred topcoat for durability and sheen OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Outback Vinyl Flakes – 1/4" Flake Size (FB-517) Outback (FB-517) is a warm and energetic flake blend designed to make a statement. With earthy tones of tan and brown offset by a punch of salmon and grounded with crisp white, this color combination brings depth, personality, and just the right amount of boldness to any epoxy flooring project. It’s a great option for both residential and commercial applications where a natural yet dynamic design is desired. Outback Flake Composition 20% Autumn Brown (F1040) – Rich, earthy tone 10% Black (F1050) – Deep base tone that adds contrast and structure 10% Brown (F1060) – Warm, natural hue that grounds the palette 15% Salmon (F1770) – Warm orange accent 35% Tan (F1785) – Light, sandy beige 10% White (F1820) – Bright contrast This Torginol Varicolored Flake blend delivers a grounded yet adventurous look that complements a wide range of interior and exterior floor spaces. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Outback flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Tan (For professional or highly experienced users only.) Seal a full flake system with PolyGloss 85 Polyaspartic Topcoat – Regular or Slow Go. Seal a partial flake system with Urethane Gloss/Satin High Performance Epoxy Topcoat. Recommended Uses Hotel Lobbies Locker Rooms Bar Tops Man Cave Restaurants Showroom Floors Porch Kitchen Interior Living Areas Garage Patio Basement High-Traffic Areas

Raven Vinyl Flakes – 1/4" Flake Size (FB-915) Raven (FB-915) is a bold, high-contrast flake blend that leans heavily on deep black, accented by subtle notes of gray and white. This mix is perfect for spaces that demand a confident, contemporary finish without relying on bright or flashy tones. Whether you’re coating a garage, showroom, or upscale interior, Raven delivers a polished, modern aesthetic with excellent durability for everyday wear. Raven Is Made Up Of: 80% Black (F1050) – Dominant, sleek foundation 5% Whisper Gray (F1800) – Soft accent tone 5% White (F1820) – Clean contrast 5% Online (F9903) – Cool mid-gray 5% Alpaca White (F9958) – Warm off-white highlight This striking mix from Torginol’s Varicolored Flake series is designed for bold floors that demand attention while remaining versatile and timeless. What Are Vinyl Flakes? Vinyl flakes are decorative aggregates used to enhance the look and feel of resin-based flooring systems. They add color, texture, and light slip resistance while increasing the visual impact of your epoxy floor. One Stop Epoxy supplies only UV-stable, precision-screened flakes for a clean, professional finish every time. Installing An Epoxy Flake Floor System For a 2-day full flake floor, broadcast Raven flakes into our LabPox 30 100% Solids Epoxy – 3 Gallon Kit. For faster turnaround, use Labfast (+) Low Odor - 85 T.C. Clear 2 Gal Kit and 2 LabSurface Universal Pigment Pods per kit of epoxy. (For professional or highly experienced users only.) Seal a full flake system with Labfast (+) Low Odor - 85 T.C. Clear 2 Gal Kit. Seal a partial flake system with AQUALAB Urethane Pure Gloss. Recommended Uses Bar Tops Locker Rooms Hotel Lobbies Interior Living Areas Showroom Floors Restaurants Kitchen Patio Man Cave Porch Garage Basement High-Traffic Areas OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

Shoreline Vinyl Flakes – 1/4" Flake Size (FB-461) Shoreline (FB-461) is a calm, neutral flake blend from Torginol’s Varicolored Flake series. This combination of soft beige, warm brown, light ivory, and subtle black delivers a balanced, natural appearance. It’s a great choice for anyone seeking a timeless epoxy floor that complements both modern and traditional interiors. Shoreline Is Made Up Of: 11% Autumn Brown (F1040) – Warm, earthy brown 6% Black (F1050) – Subtle depth and contrast 33% Ivory (F1425) – Light cream neutral 50% Scone (F1780) – Soft beige foundation This flake blend is ideal for residential or commercial settings where understated beauty and long-term performance are key. What Are Vinyl Flakes? Vinyl flakes are decorative color elements used in resin floor systems. They bring texture, depth, and visual appeal to epoxy floors while adding light slip resistance. One Stop Epoxy only offers UV-stable, precision-blended flakes designed to deliver a professional, clean finish. Installing an Epoxy Flake Floor System For a 2-day full flake floor, broadcast Shoreline flakes into our Self-Leveling 100% Solids High Strength Epoxy – 3 Gallon Kit. For faster turnaround, use 150 Fast Cure 100% Solids Epoxy – Tan. (For professional or highly experienced users only.) Seal full flake systems with PolyGloss 85 Regular Cure or PolyGloss 85 Slow Go. Seal partial flake systems with Urethane Gloss/Satin High Performance Epoxy Topcoat – 1 Gallon. Recommended Uses Kitchen Man Cave Interior Living Areas Porch Garage Bar Tops Hotel Lobbies Showroom Floors High-Traffic Areas Patio Restaurants Locker Rooms Basement OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

True Blue Vinyl Flake – 1/4" Flake Size (F1790) True Blue (F1790) is a solid-color epoxy flake with a clean, vibrant blue tone. This color brings cool energy and contrast to floor designs and is often used to accent neutral flake blends. Whether you want a subtle hint of blue or a bold highlight, True Blue delivers a crisp finish with dependable coverage. Frequently Used With: True Blue pairs especially well with Wombat (FB-616), adding contrast and visual interest to its deep charcoal and black base. A typical mix ratio is 1–5 pounds of True Blue per 40-pound box of Wombat, depending on the desired intensity. Browse all of our vinyl epoxy flake colors to find the right blend for your next floor installation. Recommended Uses Accent flake in Wombat full flake floors Custom flake blend creation Solid color flake floors Garage floors Commercial interiors and showrooms OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.

White Vinyl Flakes – 1/4" Flake Size (F1820) Product Overview White Vinyl Flakes (F1820) are a solid-color epoxy flake ideal for lightening floor systems or creating clean white floors. Unlike white epoxy, these flakes are UV-stable and won’t yellow in sunlight, making them perfect for patios, pool decks, lanais, and more. Key Features Solid white flakes for modern, neutral floors Pre-engineered 1/4" size for even coverage UV-stable and won’t yellow outdoors Compatible with all One Stop Epoxy vinyl flake systems Lightens multicolor blends when added Recommended Uses Standalone white floors in garages, lanais, patios Terrazzo-style finishes with accent colors Patios, pool decks, and UV-exposed areas Commercial and residential interior floors Installation Notes For terrazzo-style floors, blend 99% white flakes with 1% accent color Broadcast flakes evenly and remove excess before sealing Seal with PolyGloss 85 Polyaspartic or Urethane topcoat See full line of vinyl epoxy flake colors for accent options OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.