Husqvarna PG 6 S The PG 6 S is a powerful and robust planetary floor grinder with a focus on simplicity. This is a good choice for grinding and polishing jobs, and for users who prefer a non-motorised drive. Easy to use, the PG 6 S has a large capacity thanks to the 24 in / 600 mm grinding width. And because it runs on 16 amperes, it is also a versatile choice for many environments. Adjustable weights for extra grinding pressure are optional.The hermetically sealed design of the grinding head and electrical cabinet, along with the robustness of the components, contributes to high reliability and low maintenance. Features Sealed to last Improved dust pick-up Time saving tool change Fleet ready Protected electronics Ergonomic handle Adjustable grinding pressure Quick release of tool holders Specifications Type of operation Push Power source Corded Direction of rotation Both directions Article gross weight (Calc) 837.757 lbs Weight 739 lbs Grinding disc speed min 441 rpm Voltage 200-240 V Packaging height (Calc) 57.874 in Packaging length (Calc) 55.118 in Frequency 50-60 Hz Rated current 50 A Product size length 48.5 in Product size height 44.6 in Packaging width (Calc) 35.433 in Product size width 25.1 in Grinding width 23.6 in Grinding disc diameter 9.1 in Engine Power (As rated by the engine manufacturer) 8 hp Rated input power 8 hp Number of grinding discs 3 Pins 2P+E Grinding disc speed max 1,176 rpm Phases 1 ph  

Husqvarna PG 8 D The PG 8 D is a powerful planetary floor grinder with Dual Drive Technology™. This feature lets you adjust the grinding discs' rotation speed and direction independently of the drum. The machine is an excellent choice for all applications, from preparing to grinding and polishing concrete and stone floors. The mist cooler system cools the diamond tools, significantly increasing the removal rate and reducing the risk of glazing the tools (compared with not using the mist cooler system). If needed, the integrated adjustable weights can be used to increase grinding pressure and productivity.Ergonomic features like the integrated weights and adjustable handle and handle bar make handling the machine more convenient.The hermetically sealed design of the grinding head and electrical cabinet, along with the robustness of the components, contributes to high reliability and low maintenance. Features High removal and total control Sealed to last Improved dust pick-up Time saving tool change Magnetic LED lights Quick release of tool holders Higher removal rate with mist cooler system Protected electronics Ergonomic handle Adjustable grinding pressure Fleet ready EZchange™ Airflow tool holders Specifications Type of operation Push Power source Corded Direction of rotation Both directions Voltage 440-480 V Grinding disc speed min 420 rpm Packaging height (Calc) 57.874 in Packaging length (Calc) 55.118 in Product size length 54.8 in Frequency 50-60 Hz Product size height 44.6 in Packaging width (Calc) 35.433 in Product size width 33 in Grinding width 31.5 in Rated current 30 A Engine Power (As rated by the engine manufacturer) 22.1 hp Rated input power 22.1 hp Grinding disc diameter 10.6 in Pins 3P+E Phases 3 ph Number of grinding discs 3 Article gross weight (Calc) 1,344.82 lbs Weight 1,257 lbs Grinding disc speed max 1,176 rpm

Husqvarna PG 8 P A propane-powered variant of the Husqvarna PG 8, our largest and most powerful floor grinder. An integrated water tank enables wet grinding, while the propane engine eliminates the need for electrical access – making the PG 8 P the perfect choice for large outdoor concrete areas. The fuel system reduces the risk of freezing when using liquid withdrawal propane. Key components are sealed against dust and slurry for maximum reliability and low maintenance. Adjustable weights are included with the grinder, providing extra grinding pressure and making the machine easy to handle, tilt and operate. For dry applications, combine your grinder with a Husqvarna cordless dust extractor. Use a Husqvarna slurry vacuum to manage slurry when wet grinding, or connect the PG 8 P to a Husqvarna cordless dust extractor to manage dust when dry grinding. Features Equipped for wet grinding Adjustable grinding pressure Hour and RPM meter Exhaust catalyst Time saving tool change EZchange™ Airflow tool holders Sealed to last Improved dust pick-up Ergonomic handle Fuel injection Fleet ready Quick release tool holders Durable drive train Specifications Type of operation Push Power source Propane Direction of rotation One direction Motor/engine model FX850V Grinding disc speed max 861 rpm Grinding disc speed min 766 rpm Product size length 88 in Packaging height (Calc) 57.992 in Packaging length (Calc) 55 in Product size height 45.8 in Packaging width (Calc) 35 in Product size width 32.9 in Grinding width 31.5 in Engine Power (As rated by the engine manufacturer) 27 hp Grinding disc diameter 10.6 in Number of grinding discs 3 pcs Weight 1,305 oz Article gross weight (Calc) 1,268 lbs Exhaust emissions (CO₂ EU V) 0 g/kWh

Husqvarna PG 8 S The PG 8 S is a powerful and robust planetary floor grinder with a focus on simplicity. This is a good choice for grinding and polishing jobs, and for users who prefer a non-motorised drive. Easy to use, the PG 8 S has a large capacity thanks to the 32 in / 800 mm grinding width and powerful motor. Adjustable weights for extra grinding pressure are optional.The hermetically sealed design of the grinding head and electrical cabinet, along with the robustness of the components, contributes to high reliability and low maintenance. Features Sealed to last Improved dust pick-up Time saving tool change Fleet ready EZchange™ Airflow tool holders Protected electronics Ergonomic handle Adjustable grinding pressure Quick release of tool holders Specifications Type of operation Push Push Power source Corded Corded Direction of rotation Both directions Both directions Voltage 200-240 V 440-480 V Grinding disc speed min 420 rpm 420 rpm Packaging height (Calc) 57.874 in 57.874 in Packaging length (Calc) 55.118 in 55.118 in Product size length 54.6 in 54.6 in Frequency 50-60 Hz 50-60 Hz Product size height 44.7 in 44.7 in Packaging width (Calc) 35.433 in 35.433 in Product size width 33 in 33 in Grinding width 31.5 in 31.5 in Rated current 50 A 30 A Engine Power (As rated by the engine manufacturer) 14.8 hp 14.8 hp Rated input power 14.8 hp 14.8 hp Grinding disc diameter 9.1 in 9.1 in Pins 3P+E 3P+E Phases 3 ph 3 ph Number of grinding discs 3 3 Grinding disc speed max 1,176 rpm 1,176 rpm Weight 1,120 lbs 1,120 lbs Article gross weight (Calc) 1,007.513 lbs 1,007.513 lbs

Husqvarna PG 8 XR The PG 8 XR is a powerful remote-controlled planetary floor grinder with four grinding discs. The four-disc technology, which involves two pairs of grinding discs rotating in opposite directions, makes the PG 8 XR both well balanced and highly efficient. The machine is an excellent choice for all applications, from preparing to grinding and polishing concrete and stone floors. The mist cooler system cools the diamond tools, significantly increasing the removal rate and reducing the risk of glazing the tools (compared with not using the mist cooler system). If needed, the integrated adjustable weights can be used to increase grinding pressure and productivity.The all-new remote control enables precise operation and gives the operator control of important grinding parameters like real-time power consumption, incoming current, motor rpms and more. Ergonomic features like the integrated transport wheel make handling the machine easier before and after grinding.The hermetically sealed design of the grinding head and electrical cabinet, along with the robustness of the components, contributes to high reliability and low maintenance. Features Effective, uncomplicated and economical Enhanced remote-control unit Protected electronics Ergonomic and integrated transport wheel Oscillation function for flatter floors Ergonomic handle Adjustable grinding pressure Fleet ready EZchange™ Airflow tool holders Higher removal rate with mist cooler system Sealed to last Always a charged battery Improved dust pick-up Effortless transportation Time saving tool change Magnetic LED lights Quick release of tool holders Specifications Type of operation Remote-controlled Power source Corded Direction of rotation Both directions Voltage 440-480 V Grinding disc speed min 420 rpm Packaging length (Calc) 62.992 in Packaging height (Calc) 57.874 in Product size length 53.3 in Frequency 50-60 Hz Product size height 44.8 in Packaging width (Calc) 35.433 in Product size width 33 in Grinding width 31.5 in Rated current 30 A Engine Power (As rated by the engine manufacturer) 20.1 hp Rated input power 20.1 hp Grinding disc diameter 10.6 in Number of grinding discs 4 Pins 3P+E Phases 3 ph Article gross weight (Calc) 1,437.414 lbs Weight 1,422 lbs Grinding disc speed max 1,176 rpm

Husqvarna PG450 The PG 450 planetary floor grinder is a versatile and user-friendly tool that can perform a wide range of applications, including coating removal, concrete grinding, and concrete polishing. It's also suitable for making Husqvarna HYPERFLOOR. With its 450 mm grinding width, the PG 450 can effectively tackle both small, hard-to-reach areas and larger surfaces, making it an ideal choice for rental and professional applications. The machine's self-adjusting benefits make it easy to use for both professional and semi-professional applications. Additionally, its 1-phase capability means it's suitable for both industrial and domestic applications. The PG 450's compact design allows it to be easily folded and divided without tools, making it convenient for transport and storage. Features Designed for projects under 1,500 square feet Performs all types of applications such as concrete grinding, coating removal, concrete repair and polishing Triple head Planetary drive Single phase 220-240 V Easily foldable frame and simple to separate head from frame makes it easy to transport.  User-friendly logical control panel with overload protection Fixed speed no settings are required Self-adjusting floating cover with brush skirt follows the surface of the floor and the tight seal prevents dust from entering the working environment Equipped with Redi Lock®, an instant and hassle-free system for changing diamond tooling Adjustable and lockable handlebar as well as three-step height adjustment of frame makes the setting of an ergonomic position easy Diamond segments and accessories sold separately Article number: 970755004 Engine: FLOOR GRINDER PG 450 | 220-240 V | 1 ph | 60 Hz | US | 2-pin Engine Power (As rated by the engine manufacturer): 3 hp Motor: FLOOR GRINDER PG 450 | 220-240 V | 1 ph | 60 Hz | US | 2-pin Power Source: Corded Phases: 1 ph Voltage: 220-240 V Rated current: 13 A Frequency: 60 Hz Pins: 3-pin Equipment: FLOOR GRINDER PG 450 | 220-240 V | 1 ph | 60 Hz | US | 2-pin Grinding width: 17.7 in Number of grinding discs: 3 Direction of rotation: One direction Grinding disc diameter: 7.1 in Grinding disc speed min 0 rpm Grinding disc speed max: 865 rpm Product size length: 52 in Product size width: 19 in Product size height: 45 in Weight 240.3 lbs. Packaging length (Calc): 38.189 in Packaging width (Calc): 22.047 in Packaging height (Calc): 37.795 in Article gross weight (Calc): 297.624 lbs

Instant PU Repair | Fast Cure Polyurethane Crack Repair Instant PU Repair is a professional grade, two component polyurethane crack repair system designed for ultra fast curing and rapid return to service. This low viscosity material penetrates deep into the concrete capillaries, essentially "welding" the crack together. It is engineered to be ground and coated in as little as 15 to 20 minutes. This is the go to solution when speed is critical and downtime is not an option for the client. Where This Product Fits in Your System Rapid Prep: Repairing cracks and spalls immediately before grinding and coating. Small Hole Repair: Filling "pop outs" or divots in the concrete slab. Cold Storage Applications: Performing repairs in freezers or cold weather environments where epoxy will not cure. Surface Leveling: Prepping floors for high end epoxy or polyaspartic coatings. Key Advantages Ultra Fast Cure: Ready for diamond grinding in 15 to 20 minutes at room temperature. Superior Penetration: Water like viscosity allows it to reach the bottom of the crack for a structural repair. Extreme Versatility: Can be used on both interior and exterior concrete surfaces. Cold Weather Performance: Maintains a fast cure even in low temperature conditions. High Strength: Once cured, the repair is often stronger than the surrounding concrete. Application and Modification Instant PU Repair is a 1 to 1 mix ratio system that is easy to deploy on the jobsite. For larger repairs or surface leveling, this product can be modified by adding clean, dry silica sand or quartz to increase viscosity and build body. This allows you to create a "slurry" that fills wide cracks or deep spalls without the material running or sinking. Frequently Asked Questions How fast does this product cure?▾ Most repairs are ready to grind flush with the floor in 15 to 20 minutes depending on the ambient and slab temperature. Can I use this in cold temperatures?▾ Yes. This polyurethane system is specifically designed to cure in low temperature environments where standard epoxy repair materials would take hours or days to set. Is this for deep cracks or surface repairs?▾ It works for both. Its low viscosity allows it to penetrate deep hairline cracks, but it can be thickened with sand for surface spalls and larger defects. Can I coat over it with epoxy?▾ Yes. Once the material is cured and ground smooth to remove any surface film, it is fully compatible with epoxy, polyurethane, or polyaspartic coatings. Can I make it thicker?▾ Yes. You can add dry silica sand or quartz to the mixture to increase viscosity for larger repairs or to help level low spots in the slab. Does it have a strong odor?▾ It has a distinct polyurethane odor during the rapid chemical reaction, but it dissipates quickly as the material reaches full cure. Do I need to prime the crack first?▾ No. The low viscosity of the material acts as its own primer, soaking into the concrete for a high strength bond. Can I use this on a wet surface?▾ No. Like most polyurethanes, Instant PU Repair is moisture sensitive during cure. Ensure the crack and concrete are dry before application. What tool should I use to apply it?▾ Small cracks can be filled directly from a pour can. For larger areas, a flat putty knife or steel trowel is ideal for moving the sand slurry into place. Will it change color over time?▾ This product is designed for functional repair rather than aesthetic finishing. It may amber if exposed to direct UV, but since it is typically ground and coated over, this does not affect performance.

Labfast 85 (+) Low Odor One say Floor Polyaspartic Labfast 85 (+) Low Odor is a high performance, 85 percent solids polyaspartic coating designed for fast curing, low odor installations, and rapid return to service. This professional grade, two component (1 to 1) system is uniquely engineered to serve as both a pigmented base coat and a high gloss clear topcoat using a common hardener. This system is built for one day floor installations where speed, durability, and low odor are non-negotiable requirements. Where This Product Fits in Your System One Day Garage Floors: Go from prep to topcoat in a single day. Occupied Interiors: Low odor formulation makes it ideal for retail, offices, and residential basements. UV Stable Topcoat: Non yellowing protection for interior and exterior decorative flake or quartz systems. Cold Weather Installs: Maintains a reliable cure even in temperatures where epoxy systems would fail. Key Advantages Low Odor Formula: Specifically designed for sensitive environments and occupied buildings. (+) Extended Working Time: Provides approximately 25 minutes of "open time" for superior application control and better leveling. Rapid Return to Service: Tack free in as little as 45 to 60 minutes depending on humidity and temperature. Extreme Durability: 85 percent solids content provides excellent abrasion and chemical resistance. Common Hardener: Simplifies inventory by using the same Part B for both clear and pigmented layers. Weather Resistant: 100 percent UV stable for long term exterior performance without ambering. System Flexibility This product can be used in two coat or three coat systems depending on the application. It works as both a pigmented base coat and a clear protective topcoat using the same hardener, simplifying inventory and installation. For the pigmented base coat, simply add Labsurface Universal Pigment Pods to the clear Labfast 85 (+) Part A. For decorative systems, we recommend using vinyl flakes to build a full broadcast or partial broadcast floor system. Technical Performance Snapshot Property Value Mix Ratio 1 Part A to 1 Part B Solids Content 85 Percent Working Time Approximately 25 Minutes Tack Free Time 45 to 90 Minutes Traffic Ready 24 Hours (Vehicular) Frequently Asked Questions What makes the (+) version different from standard polyaspartics?▾ The (+) version is engineered with a slower cure rate, giving the installer about 25 minutes of working time. This reduces the risk of roller marks and allows for better leveling on larger floors. Can I really complete a floor in one day?▾ Yes. Because it is tack free so quickly, you can apply your base coat, broadcast your flakes, scrape, and topcoat all within a 6 to 8 hour window. Does "Low Odor" mean no odor?▾ It has a significantly lower odor profile than traditional solvent based polyaspartics, making it much safer and more pleasant for interior residential and commercial work. Is this suitable for outdoor use?▾ Absolutely. It is 100 percent UV stable and will not yellow, chalk, or peel when exposed to direct sunlight. Can this be used as both a base coat and topcoat?▾ Yes. You use the pigmented Part A (created using Universal Pigment Pods) for your base coat and the clear Part A for your topcoat, both utilizing the exact same Part B hardener. How many square feet does a gallon cover?▾ Coverage typically ranges from 125 to 200 square feet per gallon depending on surface porosity and whether it is being used as a base coat or topcoat. What is the best temperature for application?▾ It can be applied in temperatures ranging from 20°F to 85°F. Note that the material will cure much faster in high heat and high humidity. Is it resistant to hot tire pickup?▾ Yes. Once fully cured, Labfast 85 (+) is highly resistant to hot tire staining and chemical spills like oil or gasoline. Do I need to prime the concrete first?▾ For most standard garage applications, this can be applied directly to mechanically profiled concrete (CSP 2 or 3). On very porous slabs, a primer may be beneficial. What happens if I wait too long between coats?▾ If you wait longer than 24 hours to apply your next coat, you must mechanically sand the surface to ensure a proper bond.

LABFAST 85 PRO Polyaspartic | High Quality Budget Floor Coating LABFAST 85 PRO is a high solids, budget friendly polyaspartic coating designed to deliver professional grade performance and rapid return to service without the premium price tag. This professional grade (1 to 1) system allows installers to maximize profitability while providing a durable, high gloss finish that rivals more expensive formulations. This is the smart choice when you need a reliable polyaspartic system that performs at a high level while keeping your material costs under control. Elite Efficiency: Advanced Opacity Technology Even at a budget friendly price point, LABFAST 85 PRO features our Advanced Opacity Technology. This system reduces chip repulsion during the broadcast phase, ensuring your flakes stay where you put them. For the high volume installer, this means better coverage with less waste and a more consistent aesthetic across every square foot. Key Advantages Maximum Profitability: High quality performance at a price point that protects your margins. Advanced Opacity Technology: Reduces chip repulsion for superior flake broadcast efficiency. 85 Percent Solids: High film build with excellent chemical and abrasion resistance. UV Stable & Non Yellowing: 100 percent non yellowing formula suitable for both interior and exterior applications. One Day Installation: Fast cure times allow you to prep, base, and topcoat in a single shift. Common Hardener: Simplifies inventory by using the same Part B for clear and pigmented layers. System Flexibility LABFAST 85 PRO is designed to be the backbone of your flake floor business. To achieve a professional decorative finish, follow these system steps: Pigmented Base Coat: Add Labsurface Universal Pigment Pods to the clear LABFAST 85 PRO Part A. The Broadcast: Achieve a seamless decorative look using our Multi Color Flakes. Clear Topcoat: Apply a final layer of clear LABFAST 85 PRO for a high gloss, UV protected shield. Technical Performance Snapshot Property Value Mix Ratio 1 Part A to 1 Part B Tack Free Time 55 to 60 Minutes Working Time 25 Minutes Application Temp -22°F to 86°F Frequently Asked Questions Is this a lower quality polyaspartic because it costs less?▾ No. This is a high solids, high performance system. We have optimized the formulation to deliver the core strengths installers need—UV stability, fast cure, and durability—while keeping it accessible for high volume projects. Can I complete a floor in one day?▾ Yes. LABFAST 85 PRO is engineered for fast turnaround. You can typically apply the base coat and topcoat within a single day window. What does Advanced Opacity Technology do?▾ It prevents flakes from "diving" or being pushed away by the resin during broadcast. This results in more even flake distribution and saves you material by improving coverage efficiency. Can this be used outdoors?▾ Yes. It is 100 percent UV stable, meaning it will not yellow, chalk, or peel when exposed to direct sunlight on patios or walkways. How many square feet does a kit cover?▾ For full flake floors, a kit typically covers 266 to 300 square feet. For smooth floors, coverage increases to approximately 266 to 330 square feet per kit. Is this resistant to hot tires?▾ Yes. LABFAST 85 PRO provides excellent resistance to hot tire pickup, making it a reliable choice for residential garage floors. Does it use a common hardener?▾ Yes. You use the same Part B hardener for both the base coat and the topcoat, which simplifies your setup and inventory management. What is the working time?▾ You have approximately 25 minutes of working time at standard temperatures to apply and back roll the material. Is it low odor?▾ Yes, it is formulated to have a more manageable odor profile than traditional solvent-heavy polyaspartics, making it suitable for interior use. Can I apply this in cold weather?▾ Absolutely. Like our other professional polyaspartics, this can be applied in temperatures as low as -22°F.

LABFAST Low Odor 85 XT Polyaspartic Floor Coating LABFAST Low Odor 85 XT is a high solids, low odor polyaspartic coating engineered for installers who demand maximum control and superior flake broadcast efficiency. This professional grade (1 to 1) system utilizes Advanced Opacity Technology to provide better coverage and a more consistent finish in both residential and commercial environments. This system is specifically designed for one day flake floor installations where speed, appearance, and material efficiency are the top priorities. The XT Advantage: Advanced Opacity Technology What sets the 85 XT apart is its ability to reduce chip repulsion. In standard systems, flakes can "migrate" or be pushed away by the resin, leading to uneven coverage. LABFAST 85 XT keeps the flakes exactly where they belong, resulting in: Better Broadcast Coverage: Improved flake distribution with less effort. Up to 15 Percent Less Topcoat Usage: Because the base coat lays flatter and holds flakes better, you use significantly less clear topcoat to achieve a smooth finish. Superior Opacity: Hides concrete imperfections more effectively than standard polyaspartics. XT Version Performance Specs The XT version is designed for installers who need maximum "open time" to ensure a perfect finish without the material setting up too fast. Working Time: Up to 30 minutes of application control. Tack Free: Approximately 90 minutes. Application Window: Operates in extreme temperatures from -22°F to 86°F. UV Stable: 100 percent non yellowing for interior and exterior use. System Flexibility This system simplifies your inventory by using a common hardener for both the base coat and topcoat layers. For a professional decorative finish, follow these system steps: Pigmented Base Coat: Add Labsurface Universal Pigment Pods to the clear LABFAST 85 XT Part A. The Broadcast: Use our high-quality Multi Color Flakes to achieve a full or partial broadcast decorative look. Clear Topcoat: Use the clear LABFAST 85 XT with the same Part B hardener for a seamless, high-gloss protective finish. Frequently Asked Questions What makes this different from standard polyaspartics?▾ This system uses Advanced Opacity Technology to improve flake coverage and reduce chip repulsion. This results in a better looking floor and uses up to 15 percent less topcoat material. What does the XT version mean?▾ The XT version offers our longest working time (up to 30 minutes), giving installers more control and reducing the risk of roller marks compared to faster curing systems. Can I complete a floor in one day?▾ Yes. Even with the extended working time, the system is designed for same day installation, allowing you to walk on the floor within hours of completion. Is this suitable for indoor use?▾ Yes. The low odor formulation is engineered for interior environments and occupied buildings where solvent smells are a concern. Can this be used outdoors?▾ Yes. It is fully UV stable and will not yellow, chalk, or peel when exposed to direct sunlight. Does it use the same hardener for both coats?▾ Yes. You use the same Part B hardener for both your pigmented base coat and your clear topcoat layer. How much topcoat will I really save?▾ Because the flakes lay flatter in the XT base coat, most installers see a 10 to 15 percent reduction in the amount of clear topcoat needed to reach a smooth finish. What is the mix ratio?▾ The mix ratio is a simple 1 to 1 by volume, making it easy to measure and mix on site. What is the lowest temperature I can apply this in?▾ LABFAST 85 XT is an incredible cold weather performer and can be applied in temperatures as low as -22°F. Is it resistant to hot tires?▾ Yes. Like all our professional polyaspartics, once fully cured, it is highly resistant to hot tire pickup and chemical staining.

LABTEC LABFENDER® Pigment Pods LABTEC LABFENDER® Pigment Pods are high-solids pigment dispersions manufactured by Labsurface and specifically designed for use with LABFENDER® Moisture-Cured Aliphatic Polyurethane Topcoat. These convenient pigment pods are field blended, allowing contractors to easily create durable, UV-stable colored polyurethane coatings while maintaining the performance characteristics of the LABFENDER® system. Engineered for professional flooring applications, LABFENDER® Pigment Pods deliver consistent color, excellent dispersion, and long-term color stability for both residential and commercial projects. Designed for LABFENDER® Polyurethane Systems Unlike generic colorants, LABFENDER® Pigment Pods are formulated specifically for moisture-cured aliphatic polyurethane technology. The high-solids pigment dispersion blends easily into the coating, producing a uniform appearance without pigment floating, streaking, or separation. The result is a professional-grade colored topcoat that combines exceptional durability, UV resistance, and long-lasting color retention. Key Features No Pigment Separation: Formulated to prevent floating, settling, and color inconsistency. Easy to Mix: User-friendly viscosity allows for quick blending and uniform color development. UV Stable Pigments: Designed to maintain color integrity and resist fading over time. Chemically Stable: High-quality pigment technology ensures long-term performance. High-Solids Formula: Delivers rich color while maintaining low VOC content. Professional Results: Produces consistent color throughout the entire coating system. Recommended Uses Colored polyurethane floor coatings Garage floor topcoats Commercial flooring systems Decorative concrete coatings Industrial floor protection Residential concrete floors UV-stable exterior coating applications Application Guidelines Add the LABFENDER® Pigment Pod to the LABFENDER® Moisture-Cured Aliphatic Polyurethane Topcoat and mechanically mix until the color is completely uniform. Follow Labsurface's recommended mixing and application procedures for optimal performance. Why Choose LABFENDER® Pigment Pods? LABFENDER® Pigment Pods eliminate many of the common issues associated with field tinting polyurethane coatings. Their advanced formulation provides easy mixing, excellent color consistency, and superior UV stability, making them an ideal choice for contractors seeking professional-grade results. Frequently Asked Questions What are LABFENDER® Pigment Pods used for?▾ They are designed to color LABFENDER® Moisture-Cured Aliphatic Polyurethane Topcoat for decorative and protective flooring applications. Do the pigments separate after mixing?▾ No. The formulation is designed to minimize pigment separation, floating, and color inconsistency. Are the pigments UV stable?▾ Yes. LABFENDER® Pigment Pods use UV-stable pigments that help maintain color integrity and resist fading. Can these pigments be used in other coatings?▾ These pigment dispersions are specifically designed and optimized for the LABFENDER® Moisture-Cured Aliphatic Polyurethane system. Do they increase VOC content?▾ No. The pigment pods feature a high-solids formulation with low VOC content. Are they suitable for outdoor applications?▾ When used with LABFENDER® Moisture-Cured Aliphatic Polyurethane Topcoat, they provide excellent UV resistance and color stability for exterior environments. Is mechanical mixing required?▾ Yes. Thorough mixing is recommended to achieve complete pigment dispersion and uniform color. Shop LABTEC LABFENDER® Pigment Pods at One Stop Epoxy and create durable, UV-stable colored polyurethane floor coatings with professional results.