LABPOX LV UV | Ultra Low Viscosity Metallic Epoxy
LABPOX LV UV is a professional grade, 100% solids, 2 to 1 epoxy system engineered for decorative clear and metallic flooring systems where superior flow and finish quality are the top priority. With an ultra low viscosity of approximately 300 cps and a working time of 90 to 100 minutes, this system gives installers exceptional control over movement, leveling, and clarity.
Built on high performance cycloaliphatic polyamine technology, LABPOX LV UV is designed as a topcoat or body coat for metallic epoxy and clear resin flooring systems. It offers one of the longest working times in the category, enhanced UV resistance, excellent defoaming, and a clean, high end final appearance.
If your goal is a clear or metallic epoxy floor with superior flow, cleaner movement, and refined finish quality, this is one of the best products in the category.
Where LABPOX LV UV Fits in Your System
-
Metallic Body Coat: Ideal for decorative metallic floors requiring extended flow and work time.
-
Clear Body Coat: Excellent for clear resin systems where appearance and depth matter.
-
Topcoat Epoxy: Designed for clear or metallic systems that require superior leveling.
-
Decorative Spaces: Strong fit for office, retail, hospitality, and high visibility residential spaces.
Technical Performance Snapshot
| Property |
Value |
| Mix Ratio |
2 Parts A to 1 Part B |
| Viscosity |
300 cps (Ultra Low) |
| Working Time |
90 to 100 minutes |
| Tack Free |
14 hours |
| Recoat Window |
14 to 24 hours |
| Full Cure |
7 Days |
Mixing Instructions
Because this is an ultra low viscosity specialty epoxy, proper mixing is critical to maintain consistency and finish quality.
-
Pre Mix Part A: Mechanically mix Part A before combining to fully suspend all components.
-
Mix Ratio: Combine 2 parts Part A with 1 part Part B.
-
Mix Time & Technique: Mix for 3 minutes using a Box Mixer on a low speed drill turning at 300 to 450 RPM. Scrape the sides and bottom of the bucket thoroughly.
-
Immediate Placement: Once mixed, pour the material onto the floor as desired to create your metallic design. Leaving it in the pail too long will cause a heat reaction (exotherm) and ruin the product.
Coverage by Film Build
| Thickness |
Coverage (Sq. Ft. / GAL) |
Typical Use |
| 8 mils |
200 Sq. Ft. |
Thin clear coat or light body coat |
| 12 mils |
133 Sq. Ft. |
Standard clear or metallic build |
| 30 mils |
54 Sq. Ft. |
High build metallic applications |
| 50 mils |
32 Sq. Ft. |
Maximum depth decorative effects |
Frequently Asked Questions
What makes LABPOX LV UV different from standard epoxy?
Its ultra low viscosity and extremely long working time give installers much greater control over flow, pigment movement, and final appearance. It allows the resin to self level more effectively than thicker industrial epoxies.
Is this a good epoxy for metallic floors?
Yes. This is one of the best choices for metallic floors that require depth, clarity, and an extended window to manipulate designs.
How long is the working time?
You typically have 90 to 100 minutes depending on temperature and site conditions. This is nearly double the working time of standard epoxies.
Is this product UV stable?
It offers enhanced UV resistance compared to standard epoxy systems. While all epoxy will eventually amber if exposed to direct sunlight, this cycloaliphatic formulation provides superior color stability for decorative metallic floors.
Why is this better for metallic floors than standard resins?
Standard epoxies are too thick and set up too fast, which freezes the metallic pigments in place. LABPOX LV UV has an ultra low viscosity that allows pigments to flow and swirl for the entire 100 minute working window, creating a natural three dimensional look.
What is the best tool for applying LABPOX LV UV?
For metallic designs, a Magic Trowel is essential for laying out your metallic design. For applications where high build depth is required, use a 24 inch red rubber 3/16 inch notched squeegee and if necessary an 18 inch Mohair or Microfiber Roller Cover to completely cover the floor.
Do I need to sand before applying a second coat?
If you apply the next coat within 24 hours, no sanding is needed. After 24 hours, you must sand the surface to a dull finish to ensure a mechanical bond.
Can I use this for heavy duty industrial floors?
This product is best suited for residential and commercial decorative systems. For heavy industrial production floors with high forklift traffic, we recommend our industrial grade solids like LABPOX 30.
What happens if the material gets hot in the bucket?
This is an exotherm reaction. If the bucket feels hot, do not pour it on the floor. The material is beginning to cure rapidly and pouring it will result in surface defects and a failed installation.
Is it safe for indoor use?
Yes. LABPOX LV UV is 100 percent solids and low VOC. It has very low odor, making it safe for use in occupied buildings and retail spaces.
