One Stop Epoxy Urethane - WB One Stop Epoxy Urethane - WB is a two component system with excellent scratch and chemical resistance in an easy to mix 3:1 kit consisting of 3 parts urethane resin to one-part catalyst by volume. One Stop Epoxy Urethane is water based and available in Glass, Satin, and Matt and 1, 4, and 15 gallon kits. Use One Stop Epoxy Urethane - WB As a Seal Coat For Retail and Commercial Flooring Garage and Showroom Floors High-Traffic Interior Applications Restaurants and Bars Sports Arenas Automotive Service Areas Hair and Beauty Salon Commercial Kitchen Garages – Preferred Seal Coat For Partial Flake Floors Aircraft Hangers Schools and Universities Can also be used directly on a concrete floor for a very durable and cost effective grind and seal. Approved Basecoats for Urethane - WB Water-based or 100% solids epoxy: Metallic Dream Epoxy Self Leveling 100% Solids High Strength Epoxy Dye Stained Floors Concrete Countertops Surface Prep & Priming When applying over epoxy, grind concrete floors to CSP-3, vacuum dust, wipe with denatured alcohol and apply epoxy. No need to sand when apply as epoxy seal coat within 24 hours of application of waterbase or 100% solids epoxy. A chemical bond will form. Sand first when applying as epoxy seal coat after 25 hours of application to 100% solids epoxy to form a mechanical bond. When applying directly to a concrete floor for a grind and seal, Grind concrete floors to a CSP that provides the texture you’re looking for, vacuum dust, wipe with Denatured alcohol apply Tru-Alpha Water-Based Urethane clear or pigmented directly to the concrete. ( a second or third coat may be applied to attain the desired look or level of durability.) Mixing One Stop Epoxy Urethane - WB Partial kits: If mixing less than a full kit, mix three Parts A to one Part B by volume at low speed mix for two minute. Full kits: Open quart of Part B pour contents into the pail containing gallon of premeasured Part A. Stir with a jiffy mixer for 2 minutes to ensure material is mixed well. Avoid whipping air into the coating. Improper mixing may result in product outgassing. Recommended: Add 8-10oz of water for increased ease of usability and smoothness Application Mixed material can be dipped and rolled evenly with 3/16” nap roller to maintain the desired thickness. Back rolling is recommended to obtain uniform finish. Add Aluminum Oxide for slip resistance if desired. Coverage per Kit Topcoat for Metallic Floors 500-600 sqft Topcoat for Solid color floors 500-600 sqft Topcoat for Flake floors 400-500 sqft Pigmented Urethane 400 sqft  Best if applied at temperatures between 55-90 degrees Fahrenheit.   Dry time & Recoat Tack free/foot traffic: 6-8 hrs. Recoat 12-24 hrs. Heavy foot traffic 48 hrs. Vehicular Traffic 3 days. Lightly sand the surface and wipe down with denatured alcohol or acetone before applying additional coats or finish coats.