Granite Vinyl Flakes – 1/4" Flake Size (F1410)
Product Overview
Granite Vinyl Flakes (F1410) are a light gray solid-color flake offering a soft, even tone for clean, professional epoxy floors. UV-stable and blendable for both interior and exterior use.
Key Features
- Soft light-gray flakes for a uniform look
- Pre-engineered 1/4" size for even coverage
- UV-stable for indoor and outdoor applications
- Compatible with all OneStopEpoxy vinyl flake systems
Recommended Uses
- Professional garage, lanai, and patio floors
- Commercial and residential installations
- Textured flooring where a solid look is desired
- UV-exposed exterior epoxy surfaces
Installation Notes
- Blend 98–99% Granite flakes with 1–2% accent color for subtle variation
- Broadcast flakes evenly and remove excess before sealing
- Seal with PolyGloss 85 or Urethane topcoat
- See full line of vinyl epoxy flake colors for accent options
OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
