APF Polyurethane 250 Gloss– Acrylic Urethane Primer & Sealer for Concrete Product Overview APF Polyurethane 250 Gloss is a two-component, low-viscosity acrylic urethane designed for use as a primer or sealer over concrete, architectural surfaces, and decorative finishes. This product offers superior penetration and adhesion to minimally profiled concrete thanks to its unique blend of solvents and adhesion promoters. UV stable and fast-curing, it can be used in both interior and exterior applications and re-coated with either water-based or solvent-based polyurethanes.  As a finish coat, APF Polyurethane 250 delivers a hard, Gloss surface with excellent stain resistance, Satin retention, and easy cleanability. It outperforms traditional solvent-based acrylic sealers and is available in a satin finish.  Key Features Excellent Penetration & Adhesion: Bonds well to low-profile concrete and difficult substrates. UV Stable & Fast Curing: Suitable for outdoor use with rapid dry and recoat times. Color Enhancement: Improves appearance over acid-stained and integrally colored concrete. Stain & Chemical Resistant: Resists tire marking, graffiti, fuels, and many common chemicals. Re-Coatable: Compatible with both water-based and solvent-based polyurethane topcoats. Low VOC Option Available: Meets air quality regulations for restricted regions. Recommended Uses Primer for Color Quartz and Vinyl Flake Systems Topcoat for Armor-Rez Concrete Grind & Seal applications Concrete and acid-stained surfaces Retail stores, restaurants, and commercial floors Warehouses and aircraft hangars Automotive service areas and showrooms Installation Notes APF Polyurethane 250 Gloss should be applied to clean, dry, properly prepared surfaces using a roller or airless sprayer. When sealing over acid-stained or integrally colored concrete, ensure adequate ventilation and monitor surface temperatures. This product may also be used as a tie coat over hard-to-bond coatings such as polyester urethane. For best results, follow APF’s application guidelines for spread rates and cure times.  

LABPOX® LV 3D UV Epoxy – 3D Metallic Floor Topcoat Product Overview LABPOX® LV 3D UV is a 100% solids, two-component (2A:1B), low-VOC epoxy with ultra-low viscosity designed to deliver optimal flow and guaranteed 3D metallic effects in residential and commercial floor coatings. It features one of the longest pot lives in the industry for extended working time. Key Features Guaranteed 3D metallic wave and swirl effects No oily film once cured Ultra-low viscosity (300 ± 50 cps) Extra-long 90 min pot life Enhanced UV resistance (ΔE = 6) Low-odor, low-VOC – LEED eligible Cycloaliphatic polyamine technology for superior durability Recommended Uses 3D metallic epoxy floors in garages and showrooms Commercial lobbies, retail spaces, and exhibit areas Designer countertops and bar tops Art galleries, VIP reception rooms, and man caves High-end residential and commercial interiors Installation Notes Mix Component A and B at a 2:1 ratio by volume Stir gently to minimize air entrainment Apply with a medium-nap roller or squeegee for even flow Maintain ambient temperature between 60–80 °F Allow 12–24 hrs cure before light foot traffic Full chemical resistance after 7 days