APF 100% Epoxy Pigment Pack – 1/8 Gallon APF 100% Epoxy Pigment Pack is a concentrated color pigment designed for use with compatible 100% solids epoxy coating systems. It blends into clear epoxy to create a rich, uniform solid color suitable for professional concrete flooring applications. The concentrated formula promotes consistent color development throughout the epoxy mixture, helping installers achieve a smooth and professional-looking finish. Designed for 100% Solids Epoxy Systems Unlike colorants formulated for water-based or solvent-based coatings, this pigment pack is intended specifically for compatible 100% solids epoxy products. When properly mixed, it disperses evenly throughout the epoxy resin to provide consistent color and coverage. It is an ideal solution for creating solid-color base coats, primer coats, decorative flooring systems, and epoxy broadcast applications in residential, commercial, and industrial environments. Key Features Made for 100% Solids Epoxy: Formulated for use with compatible clear epoxy coating systems. Rich, Uniform Color: Helps produce consistent solid color throughout the mixed coating. Concentrated Formula: Provides efficient pigmentation without the need for measuring loose powdered pigments. Easy Mixing: Disperses into the epoxy resin using standard mechanical mixing equipment. Professional Finish: Helps create smooth, attractive floors with reliable color consistency. Multiple Applications: Suitable for solid-color floors, flake base coats, broadcast systems, and other decorative epoxy applications. Recommended Uses Solid-color epoxy floors Full flake and partial flake base coats Garage floor coatings Commercial concrete floors Warehouses and workshops Retail and industrial spaces Decorative concrete coating systems Compatible Products This pigment pack is designed for use with compatible APF 100% solids epoxy coating systems. Always review the Technical Data Sheet for the epoxy product being used to confirm compatibility, recommended pigment loading, mixing instructions, coverage, and application requirements. Not intended for use in water-based coatings unless specifically approved by the coating manufacturer.

White Epoxy Pigment – 32oz for 3-Gallon Kit Product Overview One Stop Epoxy’s White Epoxy Pigment delivers bright, true white color for 100% solids epoxy floors. Each 32 oz container is pre-measured to pigment a full 3 gal kit, ensuring consistent coverage without streaks, fading, or dull spots. Key Features Pre-measured 32 oz container for 3 gal epoxy kits True white color with high opacity and full coverage High-viscosity formula resists separation during mixing Easy blending for a smooth, reflective finish Ideal as a base coat for flake systems or stand-alone white floors Recommended Uses Base coat for full or partial flake epoxy systems Stand-alone white floors in cleanrooms and med clinics Showrooms, photo studios, and high-contrast design spaces Garages, offices, and utility areas needing a bright white finish Installation Notes Add the entire 32 oz container of pigment to the 2-gallon Base, or Part A, component. Mix thoroughly with a mixing paddle for at least 1 minute, until the pigment is fully dispersed and the color is uniform. Add the Activator, or Part B, only after the pigment has been completely mixed into the Base component. Mix the Base and Activator according to the epoxy product instructions, then apply the coating using standard epoxy installation procedures.