Cherry Bomb Vinyl Flakes – 1/4" Flake Size (F9920)
Product Overview
Cherry Bomb Vinyl Flakes (F9920) are a solid red epoxy flake known for their bold color and high visibility. Ideal as an accent, these flakes add striking contrast and visual energy to garage floors, lanais, patios, and more.
Key Features
- Vibrant solid red flakes for high-impact accent
- Pre-engineered 1/4" size for even distribution
- Compatible with all vinyl flake systems
- Long-lasting color retention
Recommended Uses
- Accent color in multicolor blends
- Red highlights with Domino (FB-411) blends
- Themed epoxy floors in garages, lanais, patios
- Residential and commercial installations
Installation Notes
- Broadcast 1–5 lbs per 400 Square Feet of epoxy base coat
- Adjust flake rate based on desired coverage
- Remove excess flakes before sealing
- Seal with one of our Professional Grade Topcoats for best results
- See full line of vinyl flake colors to build your custom mix
OneStopEpoxy.com where nationwide shipping on vinyl flakes is always free.
When broadcasting flakes, we recommend throwing them at a 45 degree angle parallel to the floor. This will ensure that you will receive the proper and even coverage with each batch of flakes.
Partial
The best way to broadcast a partial or decorative flake floor is as follows:
1. Pour flakes into a 1 - 2 gallon bucket.
2. If right handed, hold the bucket under your left arm like a football.
3. Grab a small pinch of flakes with your right index finger, thumb, and forefinger, and gently flick the flakes up and let the flakes fall down like snow.
Apply the flakes evenly and to your liking.
Full
The best way to broadcast a full flake floor is as follows:
1. Pour flakes into a 5 gallon bucket from Home Depot or Lowes.
2. If right handed, hold the bucket under your left arm like a football.
3. Reach in with your right hand and scoop up as many flakes as you can and "feed the chickens"
4. We call it "Feeding the chickens" because you grab a handful and broadcast them up into the air allowing them to fall down heavily and evenly.
For a full flake floor system you will need 1lb of flakes for every 8 Sq Ft of flooring.
For a partial flake floor floor system you will need between 5 to 10Lbs for every 400 Sq Ft depending on personal preference.
