7" Transitional / Ceramic Cup Wheels - Threaded When it comes to grinding and polishing concrete, ceramic bonds are a medium between metal bonds and metal resin bonds. They are designed to be used wet and provide exceptional longevity on hard and medium concrete surfaces offering a beautiful finish. Ceramic cups are perfect for edging and can often eliminate the need for a metal bond cup. They are designed to prep and polish simultaneously, saving time and effort. These cups are highly effective on hard and medium concrete surfaces, delivering a smooth finish that is second to none. Different grits and segments available depending on the desired level of scratch. 

7" Velcro Backing Pads - 5/8-11 Thread  Our resin variety and transitional style bonds provide exceptional scratch removal and create a stunning high shine finish, all while maintaining maximum efficiency.

7” Honeycomb Hand-Held Resin Pads Wet / Dry Our resin variety and transitional style bonds provide exceptional scratch removal and create a stunning high shine finish, all while maintaining maximum efficiency.

9 Inch Sherlock Roller Frame  Features a 4 plastic cage to minimize slip between roller and cover 1/4 inch diameter rod attachment for any standard pole Textured handle for maximum grip  Steel rod for added durability  When it comes to laying down your epoxy coating an 18inch roller frame is incapable of reaching your edges. Place your 9 inch roller frame on a pole and roll right along the wall to ensure a non-stop finish from floor to wall. Try out our 1In X 48In Straight Fiberglass Handle With Metal Tip to get the job done right!  

Ameripolish® B-O-G Urethane Coating Product Overview Ameripolish® B-O-G is a single-component modified urethane coating designed to protect concrete and cementitious overlayment systems from stains caused by corrosive cleaning agents. Ready to use with a user-friendly application style. Key Features Ready to use (RTU) Glossy, non-yellowing finish Fast-drying formula Chemical resistant Mildew and UV protection Suitable for most cementitious surfaces Recommended Uses Concrete and cementitious overlayment systems Residential and commercial floors Garages, patios, and lanais Industrial and high-traffic areas Installation Notes Ensure surface is clean, dry, and free of contaminants Stir thoroughly before use; no on-site mixing required Apply with a roller or airless sprayer at 300–400 sq ft per gallon Maintain ambient temperature between 50 °F and 90 °F Allow 2–4 hours for light foot traffic; 24 hours for full cure

Ameripolish G3 Burnishing Pads 21" 2 Pack Ameripolish G-series pads, specially designed for high-speed floor machines operating between 1500-3000 RPM. These nonwoven burnishing pads, crafted with durable polyester fibers, are perfect for the dry burnishing phase following the application and drying of Ameripolish stain protection. Explore our range of varying pad sizes to meet your specific needs. Elevate your floor maintenance with Ameripolish G-series pads.

Ameripolish Strip n Clean 1 Gal Ameripolish Strip n Clean is a water-based stripping agent that is designed to remove the Ameripolish 3D SP sealer from polished concrete floors without any need for grinding, It can also help remove mold, mildew, and other contaminants that could otherwise impair your project. This easy-to-use product is an essential tool for anyone looking to prepare their concrete floors for a fresh coat of sealer or a ColorJuice application. 6-10¢PER FT2 400-600FT2PER GALLON

Ameripolish SureLock Dyes - Vibrant Chemically Bonded Concrete Colors Product Overview Ameripolish® SureLock Dyes are high-performance, chemically bonding colorants for polished concrete. With an updated formula, these dyes provide the most vibrant colors Ameripolish® has ever produced. Designed for indoor use, SureLock Dyes mix easily with water or Ameripolish® ColorSolve™ and are applied just before densifying with 3D HS or HSL, allowing the color to penetrate deeply and chemically bond with the concrete. The liquid concentrate is fast and convenient no 3-hour wait to dissolve is needed like with other dyes. UV stabilizers resist fading, while a built-in penetrating agent ensures consistent, rich colors even on hard, dense surfaces. VOC-compliant and compatible with optional 3D line densifiers, SureLock Dyes are the ideal choice for achieving long-lasting, vibrant polished concrete finishes. Frequently Asked Questions (FAQs) What surfaces are compatible with SureLock Dyes?SureLock Dyes are designed for polished concrete surfaces, including hard, dense concrete, and are ideal for indoor use. How do SureLock Dyes chemically bond to concrete?When applied just before densifying with 3D HS or HSL, the dyes penetrate the concrete and chemically bond, ensuring long-lasting, vibrant color. Can I mix SureLock Dyes with water or other solutions?Yes, SureLock Dyes mix easily with water or Ameripolish® ColorSolve™, providing convenience and flexibility for your project. Do I need to pre-dissolve SureLock Dyes before use?No. The liquid concentrate eliminates the traditional 3-hour pre-dissolving process, saving time and simplifying application. Are SureLock Dyes UV-stable?Yes, the formula contains UV stabilizers to resist fading, maintaining rich, consistent colors over time indoors.

APF CastorCrete SL – Urethane Cement Product Overview APF CastorCrete® SL is a high-performance, slurry-applied cementitious polyurethane flooring system designed for environments that demand extreme durability. Applied at 1/8 to 1/4 inch thickness using a gauge rake and trowel, this system resists physical abuse, impact, steel-wheeled traffic, and chemical exposure—including hot cooking oils, animal fats, and common solvents. This environmentally friendly system contains low VOCs and is made from sustainable raw materials. It may be applied to green concrete (7–10 days old) and to substrates showing 100% moisture (ASTM F2170). It also accommodates thermal movement and holds up under constant service temperatures up to 200°F (93°C). An optional anti-microbial additive is available to help inhibit bacterial and fungal growth. CastorCrete SL installs without a primer, making it a rapid-turnaround solution. It can be optionally top coated with CastorCrete TC, Polyaspartic 7500, Polyurea 5100, or Epoxy 600 or Epoxy 900 to increase chemical, UV, or abrasion resistance. Key Features Resists Thermal Cycling: Withstands steam, hot water, and fluctuating temperatures. Durable Surface: Handles steel-wheeled carts, impact, and abrasion. Green Concrete Friendly: Can be applied to fresh concrete (7–10 days old). Low Odor & Sanitary: Ideal for hygienic environments and food handling areas. Optional Topcoats: Compatible with multiple topcoat systems for added protection. Recommended Uses Food and beverage manufacturing plants Meat, poultry, and fish processing areas Commercial kitchens and prep areas Pharmaceutical production facilities Sanitary and wash-down environments Installation Notes CastorCrete SL is installed between 1/8 and 1/4 inch thickness using a gauge rake and trowel. It does not require a primer and can be applied directly to green or high-moisture concrete. It cures quickly, minimizing downtime. Topcoat selection depends on performance requirements—chemical resistance, UV stability, or visual consistency. Consult APF guidelines for detailed mixing, spread rate, and cure time instructions.  

APF Epoxy 100 – Water-Based Epoxy Primer for Damp Concrete Product Overview APF Epoxy 100 is a two-component, water-based epoxy primer designed for easy application and strong adhesion to properly prepared substrates—including damp concrete. With low VOC content and blush-free curing across a wide temperature range, this primer provides a dependable base layer for a variety of coating systems, including epoxy, polyurethane, and acrylic finishes. This versatile primer is the standard choice across all APF flooring systems where moisture remediation is not required. It helps ensure a strong bond between the substrate and topcoat while simplifying installation and reducing downtime. Key Features Water-Based & Low VOC: Installer-friendly and compliant with air quality regulations. Blush-Free Cure: Cures cleanly across a wide temperature range. Adheres to Damp Concrete: Ideal for conditions where drying time is limited. Universal Compatibility: Works with epoxy, urethane, and acrylic systems. Standard Primer for APF Systems: Used across multiple APF coating systems. Recommended Uses Residential garage floors Warehouse and factory floors Automotive repair shops Commercial and industrial facilities Primer coat under epoxy or urethane finishes Installation Notes APF Epoxy 100 should be applied to properly prepared substrates using standard rolling or brushing techniques. It can be installed over damp concrete and is suitable for use in both residential and commercial environments. Always follow APF's technical data sheet for surface preparation, coverage rates, and recoat times.

Epoxy 400 Wall Coating (WC) APF Epoxy 400 Wall Coating (WC) is a high-performance, 100% solids resin system engineered for professional wall rendering. This medium-viscosity formula provides an exceptional balance of physical strength, flexibility, and chemical resistance, ensuring a seamless and easy-to-clean surface. Designed for superior flow and handling—even at lower temperatures—it offers excellent application qualities. When roller-applied, the high pigment loading ensures consistent color and maximum substrate hide for a professional, high-gloss finish. USES Biomedical & Pharmaceutical Labs Food & Beverage Processing Commercial Kitchens Health Care & Veterinary Facilities Institutional & Animal Care ADVANTAGES Enhanced Durability: Compatible with Fiberglass reinforcement for maximum strength. Superior Workability: Optimized viscosity specifically for wall coating applications. High Performance: 100% solids formula with excellent thickness (12-16 mils).