{"title":"Partial Flake Recommendations","description":"","products":[{"product_id":"nukote-premera-fusion-primer","title":"Nukote Premera Fusion Primer","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003ePremera FP1 Fusion Primer\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePremera FP1 Fusion Primer\u003c\/strong\u003e is a cutting-edge, fast-drying nano-adhesive primer designed to bond seamlessly to nearly any \u003cstrong\u003econtaminate-free hard surface\u003c\/strong\u003e. Its unique formulation creates a \u003cstrong\u003emolecular bridge\u003c\/strong\u003e between coatings and substrates, allowing coatings that would typically struggle to adhere to form a strong, durable bond. This molecular bonding eliminates the need for time-consuming sanding or mechanical abrasion, drastically \u003cstrong\u003estreamlining your application process\u003c\/strong\u003e and reducing preparation time.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003eWhy Premera FP1 Can Replace Mechanical Abrasion:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eTraditionally, surface preparation requires mechanical abrasion like sanding or grinding to roughen the surface, ensuring that the new coating can properly bond. \u003cstrong\u003ePremera FP1 Fusion Primer\u003c\/strong\u003e uses \u003cstrong\u003eadvanced nanotechnology\u003c\/strong\u003e to form \u003cstrong\u003ecovalent bonds\u003c\/strong\u003e at the molecular level. These bonds penetrate deep into the substrate, anchoring the coating firmly to the surface without needing to roughen it first.\u003c\/p\u003e\n\u003cp\u003eIn plain English, this means that instead of having to sand down or grind a concrete or metal surface, \u003cstrong\u003ePremera FP1\u003c\/strong\u003e chemically fuses to the surface, creating a strong connection. This not only saves time but also preserves the integrity of the substrate by avoiding potential damage that mechanical abrasion can cause. \u003cstrong\u003ePremera FP1\u003c\/strong\u003e allows you to move straight to the next layer without compromising on adhesion quality.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003eKey Features Of Premera FP1 Fusion Primer:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo need for sanding or mechanical abrasion\u003c\/strong\u003e: Streamlines preparation while maintaining superior bonding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong bonding\u003c\/strong\u003e: Works even on the hardest-to-bond surfaces, including smooth metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast drying\u003c\/strong\u003e: Quick adhesion promoter for efficient application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovalent bonding\u003c\/strong\u003e: Bonds at the molecular level, becoming one with the surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use\u003c\/strong\u003e: Suitable for almost any substrate, including concrete, steel, wood, tile, and fabric.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVirtually invisible\u003c\/strong\u003e: Leaves no visible residue after application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoisture and stain resistance\u003c\/strong\u003e: Protects from within, reducing future maintenance costs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong-lasting protection\u003c\/strong\u003e: Extends the life of the substrate, protecting it from environmental wear and tear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan style=\"color: rgb(8, 28, 143);\"\u003eTypical Uses of Premera FP1 Fusion Primer\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion layer\u003c\/strong\u003e: Bonds coatings to substrates or between two coatings, ensuring a durable finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubstrate variety\u003c\/strong\u003e: Works on painted or unpainted iron, aluminum, copper, stainless steel, powder-coated surfaces, galvanized surfaces, concrete, wood, rubber, plastic, fiberglass, and glass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003eIdeal for Concrete Coatings:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eFor professionals in the concrete coatings industry, \u003cstrong\u003ePremera FP1 Fusion Primer\u003c\/strong\u003e provides a faster, more efficient way to achieve a perfect bond, especially when used in conjunction with one of our or our popular \u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/onestopepoxy.com\/collections\/metallic-flooring-kits\"\u003e\u003cspan\u003emetallic\u003c\/span\u003e\u003cspan\u003e flooring\u003c\/span\u003e\u003cspan\u003e kits\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e. By eliminating the need for mechanical abrasion, it reduces preparation time while ensuring high-quality results.\u003c\/p\u003e\n\u003cp\u003eTo see just how easy the application process is watch this \u003ca href=\"https:\/\/www.youtube.com\/watch?v=VVuu4FwrGBE\"\u003eshort YouTube video \u003c\/a\u003eon the application process.\u003c\/p\u003e","brand":"Nukote","offers":[{"title":"1 Gallon","offer_id":45756243968303,"sku":"D-PRE-FP1-1G","price":165.0,"currency_code":"USD","in_stock":true},{"title":"5 Gallons","offer_id":45756244001071,"sku":"D-PRE-FP1-5G","price":825.0,"currency_code":"USD","in_stock":true},{"title":"50 Gallons","offer_id":45756244033839,"sku":"PREPSTT7LF50","price":8250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0782\/3150\/3151\/files\/premera-fp1-fusion-primer-no-grind-adhesive.jpg?v=1776974543"},{"product_id":"epoxy-water-based-1-gal","title":"Epoxy Primer WB - 1 Gal","description":"\u003ch1\u003e\u003cspan style=\"color: #081c8f;\"\u003eOne Stop WB Epoxy Primer | High Performance 2 Part Water Based Epoxy\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eOne Stop WB Epoxy Primer\u003c\/strong\u003e is a professional grade water based epoxy designed to create a high bond foundation for epoxy flooring systems. This product is most commonly used as a pore sealing primer under 100% solids epoxy, where controlling outgassing and ensuring adhesion is critical to the success of the entire floor.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Compatibility\u003c\/strong\u003e – Approved for use with One Stop 100% Solids, 150FC, Metallic Dream, WB Urethanes, and PolyGloss 85.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti Purpose Utility\u003c\/strong\u003e – Functions as a high bond primer, a flake floor base coat, or a durable interior finish coat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePore Sealing Technology\u003c\/strong\u003e – Eliminates outgassing bubbles so your next layer of 100% solids Epoxy goes out bubble free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Strength\u003c\/strong\u003e – Scratch and abrasion resistant; tough enough for vehicle traffic and commercial use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC Compliant\u003c\/strong\u003e – Safe for interior use in garages, kitchens, warehouses, and basements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMost coating failures start at the surface.\u003c\/strong\u003e A properly applied primer like this one eliminates that risk by sealing the concrete and creating a consistent foundation for the system.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #081c8f;\"\u003eWhere This Product Fits in Your System\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThis primer is designed to work as the first step in a complete epoxy flooring system.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse under \u003cstrong\u003e100% solids epoxy base coats\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUse before \u003cstrong\u003eFlake or Quartz Systems\u003c\/strong\u003e to improve adhesion\u003c\/li\u003e\n\u003cli\u003eCan be used as a standalone coating in light duty applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not just a primer. It is the foundation that determines how well your entire system performs.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #081c8f;\"\u003eMixing and Application Instructions\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStep 1 Pre Mix\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eBecause this is a water based product, settlement is normal and expected. Blend the bucket of \u003cstrong\u003eBASE (Part A)\u003c\/strong\u003e for 1 minute before pouring into a larger bucket and combining with activator.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStep 2 The Blend\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 1 Gallon Kits:\u003c\/strong\u003e Pour Part A and Part B into a larger mixing bucket and blend for \u003cstrong\u003e2 minutes\u003c\/strong\u003e using a paddle mixer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor 2 or More Gallons:\u003c\/strong\u003e When mixing multiple kits together (up to 4 gallons in a 5 gallon bucket), you must use a \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/mixers\/products\/box-mixer-5-diameter-7-16-hex-shaft-24-oal\" style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003eBox Mixer\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e and blend for \u003cstrong\u003e2 - 3 minutes\u003c\/strong\u003e to ensure a complete chemical reaction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eStep 3 Application\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003ePour the mixed material directly onto the floor. While wearing \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/epoxy-application-tools\/products\/epoxy-shoes-with-1-inch-rounded-spikes\" style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003espiked shoes\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e, spread the material evenly using a \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/squeegees\/products\/24-inch-flat-red-rubber-squeegee\" style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003eflat squeegee\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmall Projects:\u003c\/strong\u003e You may utilize a paint tray and dip and roll using a \u003cstrong\u003e1\/4” nap epoxy roller\u003c\/strong\u003e (ensure the roller is de-shedded prior to use). To avoid roller lines, you may backroll the floor before the product becomes tacky.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #081c8f;\"\u003eCoverage and Technical Specs\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAll SFPG dependent upon porosity of the concrete:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimer on Porous Concrete:\u003c\/strong\u003e 200 to 250 SFPG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrind and Seal Base Coat:\u003c\/strong\u003e 200 to 250 SFPG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrind and Seal Body Coat:\u003c\/strong\u003e 150 to 200 SFPG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight Duty DIY Garage Floor (Needs Pigment and Two Layers):\u003c\/strong\u003e 150 to 175 SFPG\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete Sealer \/ Dust Proofing:\u003c\/strong\u003e 200 to 250 SFPG\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDensifier Application:\u003c\/strong\u003e When applying to very soft or weak concrete, add 10% water to the first coat and apply as a densifier. The material should be applied to saturate the surface and allow for proper penetration into the concrete. Coverage rates for this application will vary depending on the condition and porosity of the concrete.\u003c\/p\u003e\n\u003cp\u003eOnce the densified layer has dried, apply a second full strength coat without dilution. This exception applies only when using the product as a densifier and does not apply to standard primer or coating applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e Best if applied between 55 and 90 degrees Fahrenheit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan style=\"color: #081c8f;\"\u003eCure Schedule and Recoating\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack Free \/ Foot Traffic:\u003c\/strong\u003e 12 Hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat Window:\u003c\/strong\u003e 24 Hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy Foot Traffic:\u003c\/strong\u003e 48 Hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVehicular Traffic:\u003c\/strong\u003e 72 Hours (3 Days)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"background-color: #f4f6fb; padding: 15px; border-left: 4px solid #081C8F;\"\u003e\u003cstrong\u003eWhen To Sand For Additional Coats:\u003c\/strong\u003e A second coat may be applied within the 24 hour recoat window without sanding. If more than 24 hours have passed since the previous application, sanding is required. Sand the surface using a 100 to 120 mesh sanding screen, then vacuum and wipe the surface with denatured alcohol or acetone to achieve a proper mechanical bond before applying the next coat.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #081c8f;\"\u003eFrequently Asked Questions\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add a little water to make the primer spread further?\u003c\/strong\u003e\u003cbr\u003eNo. You should not thin to expand coverage rate. Thinning disrupts the chemical bond and will result in a weak coat. The only exception is adding 10% water when using the product strictly as a densifier for very soft, crumbly concrete.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy do I have to sand before applying my metallic or topcoat?\u003c\/strong\u003e\u003cbr\u003eSanding creates a mechanical profile or \"teeth\" for the next layer to grab onto. Skipping this step leads to poor adhesion and potential delamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich mixer should I use?\u003c\/strong\u003e\u003cbr\u003eFor single gallon kits, a standard paddle mixer is fine. For anything 2 gallons or larger, a \u003cstrong\u003eBox Mixer\u003c\/strong\u003e is required to ensure the Part A and Part B are fully integrated without trapping excessive air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a primer before epoxy?\u003c\/strong\u003e\u003cbr\u003eYes. A primer improves adhesion, seals concrete pores to reduce outgassing, and helps prevent bubbles in your high build layers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this under metallic epoxy?\u003c\/strong\u003e\u003cbr\u003eYes. This is one of the best applications for this product as it ensures the Metallic Dream layer goes down over a sealed surface, preventing bubbles from ruining the finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a high build coating?\u003c\/strong\u003e\u003cbr\u003eNo. Water based epoxy is typically used as a primer or light duty coating, not as a high build system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used as a final coat?\u003c\/strong\u003e\u003cbr\u003eYes, in light duty environments such as storage areas or mechanical rooms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if I skip sanding between coats?\u003c\/strong\u003e\u003cbr\u003eSkipping sanding can lead to poor adhesion and potential delamination between layers of the flooring system.\u003c\/p\u003e","brand":"One Stop Epoxy","offers":[{"title":"Clear","offer_id":56130514813231,"sku":"35001-Clear","price":89.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":56130514845999,"sku":"OS35101-WHITE","price":89.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0782\/3150\/3151\/files\/water-based-primer-epoxy.png?v=1777650714"},{"product_id":"moisture-vapor-epoxy","title":"Moisture Vapor Barrier Epoxy | 25 lb Rated 100% Solids MVB - 3 Gallon Kit","description":"\u003ch1 style=\"color: #081c8f;\"\u003eMoisture Vapor Barrier Epoxy | 25 lb Rated 100% Solids MVB\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eOne Stop Epoxy 100% Solids Moisture Vapor Barrier Epoxy\u003c\/strong\u003e is a professional-grade foundation coating engineered to block moisture vapor transmission through concrete slabs. Rated for extreme conditions up to \u003cstrong\u003e25 lbs of moisture vapor emission\u003c\/strong\u003e, this product creates a permanent barrier that prevents the most common causes of floor failure: peeling, bubbling, and delamination.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is not a finish coat or a receiver coat. It is a critical insurance policy used to stabilize concrete before installing a 100% solids epoxy build system.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2 style=\"color: #081c8f;\"\u003eWhy Professionals Use a 25 lb Rated MVB\u003c\/h2\u003e\n\u003cp\u003eConcrete is naturally porous and acts like a sponge, releasing moisture vapor for years. When this vapor pressure builds up beneath a standard coating, it physically breaks the bond, leading to total system failure. Our MVB Epoxy solves this by penetrating deep into the concrete capillaries to create a structural seal that can handle high hydrostatic pressure.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtreme Moisture Resistance:\u003c\/strong\u003e Rated to block up to 25 lbs of vapor transmission—far exceeding standard epoxies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrevents Osmotic Blistering:\u003c\/strong\u003e Stops the bubbles that form when moisture is trapped under the floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Bond Strength:\u003c\/strong\u003e Provides a stabilized, non-porous surface for your next epoxy layer to lock onto.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero VOC Formulation:\u003c\/strong\u003e 100% solids with no odor, making it safe for interior and basement applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #081c8f;\"\u003eThe Proper System Sequence\u003c\/h2\u003e\n\u003cp\u003eTo ensure a lifetime bond on slabs with moisture concerns, follow the professional \"Step-Up\" method:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Barrier:\u003c\/strong\u003e Apply One Stop MVB Epoxy directly to mechanically profiled concrete (CSP 2-3).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Build Coat:\u003c\/strong\u003e Once cured, apply a layer of \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/100-solids-epoxy\/products\/self-leveling-100-solids-epoxy?variant=45756217426223\" style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003e100% Solids Self Leveling Epoxy\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e. This acts as your pigmented base or \"receiver coat\" for flakes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe Finish:\u003c\/strong\u003e Complete the system with a high-performance Polyaspartic or Urethane topcoat.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2 style=\"color: #081c8f;\"\u003eMixing and Application Requirements\u003c\/h2\u003e\n\u003cp style=\"background-color: #f4f6fb; padding: 15px; border-left: 5px solid #081C8F;\"\u003e\u003cstrong\u003ePro Tip:\u003c\/strong\u003e Do not broadcast flakes or quartz directly into the MVB. This material must be applied as a continuous, unbroken film to effectively block moisture. Mix for a full 3 minutes to ensure the chemical barrier is fully cross-linked.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix Ratio:\u003c\/strong\u003e 2 Parts A to 1 Part B.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixer:\u003c\/strong\u003e Use a box or cage style mixer at 300 to 450 RPM.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 100 to 150 square feet per gallon depending on porosity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Time:\u003c\/strong\u003e 8 to 10 hours at room temperature.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 style=\"color: #081c8f;\"\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a moisture vapor barrier epoxy?\u003c\/strong\u003e\u003cbr\u003eIf moisture is present, unknown, or if you are installing over a slab on grade, this is a necessary preventative step to avoid total coating failure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know if my concrete has a moisture problem?\u003c\/strong\u003e\u003cbr\u003eVisible signs include efflorescence (white powder) or dark spots. The only certain way is testing, but applying MVB is the safest preventative measure for any slab where the history is unknown.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this for basement floors?\u003c\/strong\u003e\u003cbr\u003eYes. Basements are inherently prone to moisture issues. Using this vapor barrier is the best way to ensure your basement epoxy floor never peels or bubbles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I broadcast flakes directly into the MVB?\u003c\/strong\u003e\u003cbr\u003eNo. The Moisture Vapor Barrier must be applied as a clean, continuous film to seal the slab. After it cures, you apply a 100% solids epoxy layer to serve as your pigmented receiver coat for flakes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this required for garage floors?\u003c\/strong\u003e\u003cbr\u003eIt is highly recommended in humid environments, on older slabs, or if you are a professional installer offering a long-term warranty to your clients.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if I skip this step?\u003c\/strong\u003e\u003cbr\u003eSkipping moisture control on a high-vapor slab leads to osmotic blistering and total system delamination, requiring a costly total replacement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this be used as a finished floor?\u003c\/strong\u003e\u003cbr\u003eNo. This is a functional base layer designed to stabilize the slab. It must be covered by a 100% solids epoxy build coat and an appropriate topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat should I use over this product?\u003c\/strong\u003e\u003cbr\u003eTypically, installers follow this with a 100% solids epoxy (like our \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/100-solids-epoxy\/products\/self-leveling-100-solids-epoxy?variant=45756217426223\" style=\"color: rgb(0, 170, 255);\"\u003eSelf Leveling\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e or \u003cspan style=\"color: rgb(0, 170, 255);\"\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/onestopepoxy.com\/collections\/100-solids-epoxy\/products\/150-fast-cure-100-solids-epoxy-clear?variant=46202331857199\" style=\"color: rgb(0, 170, 255);\"\u003e150 Fast Cure\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e) before moving to their decorative broadcast or topcoat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow long do I have to wait before applying my next coat?\u003c\/strong\u003e\u003cbr\u003eThe material is generally dry to the touch in 8 to 10 hours. You should apply your next coat of epoxy within 24 hours to ensure a strong chemical bond.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the mix ratio?\u003c\/strong\u003e\u003cbr\u003eThe mix ratio is 2 parts Part A to 1 part Part B. Mix thoroughly with a drill mixer for a full 3 minutes before pouring.\u003c\/p\u003e","brand":"One Stop Epoxy","offers":[{"title":"Default Title","offer_id":50599780286767,"sku":"OS10103","price":240.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0782\/3150\/3151\/files\/moisture-vapor-barrier-epoxy-25lb.png?v=1777994819"},{"product_id":"premera-easymvb","title":"Premera EasyMVB - 1 Gal","description":"\u003ch2\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003ePremera Easy MVB\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePremera EasyMVB\u003c\/strong\u003e\u003cspan\u003e is a unique surface treatment for concrete consisting of specialized reactive chemicals in a colloidal silica matrix. EasyMVB can be used as a concrete treatment to penetrate into concrete and creates a moisture vapor barrier within concrete by reacting with and sealing pores and capillaries, eliminating vapor transmission and solving hydrostatic pressure challenges. EasyMVB is also a complementary pre-primer treatment for Premera’s sol-gel based products. When used in combination with Premera FP1 Fusion Primer, up to 25 lbs of moisture vapor can be withstood, effectively eliminating adhesion issues caused by moisture vapor. When applied to concrete or any pozzolanic material, Premera EasyMVB penetrates to seal, densify and thereby harden cementitious surfaces. Premera EasyMVB is formulated to penetrate and block capillaries by reacting with free calcium hydrates to form an insoluble, permanent barrier. It effectively eliminates efflorescence, improves water resistance, water repellency, and surface properties of cementitious materials. Premera EasyMVB is recommended for use as a pre-priming surface treatment on floorings, liners in immersion application, and adhered waterproofing membranes – including structures under hydrostatic pressure. Premera EasyMVB may be used as a standalone surface treatment in certain applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: rgb(8, 28, 143);\"\u003eFeatures:\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmentally friendly, zero VOC\u003c\/li\u003e\n\u003cli\u003eBlocks up to 25 lbs of hydrostatic pressure\u003c\/li\u003e\n\u003cli\u003ePrevents efflorescence from occurring\u003c\/li\u003e\n\u003cli\u003eCan polish concrete after HLT is usedReduces risk of moisture out-gassing, pin-holing, and blisters in top coats\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Nukote","offers":[{"title":"1 Gallon","offer_id":55542586868015,"sku":"PRE-MVB-1G","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0782\/3150\/3151\/files\/premera-easymvb-moisture-vapor-barrier-25lbs-protection.jpg?v=1776976118"}],"url":"https:\/\/onestopepoxy.com\/collections\/partial-flake-recommendations.oembed","provider":"One Stop Epoxy","version":"1.0","type":"link"}